CN03F3V06

Filtre à cartouche Polygard^® CN

pore size 0.3 μm, cartridge nominal length 30 in. (75 cm), Code F (double open end w/flat gaskets)

• Synonyme(s) : Polygard-CN Cartridge Filter 30 in. 0.3 μm Code F Fluoroelastomer
• Code UNSPSC : 23151806
• eCl@ss : 32031690

Propriétés

• Matériaux: fluoroelastomer seal; polypropylene
• Niveau de qualité: 400
• Caractéristiques: hydrophilic
• Fabricant/nom de marque: Polygard
• Paramètres: 4.8 bar max. differential pressure (70 psid) at 25 °C; 4.8 bar max. inlet pressure (70 psi) at 25 °C
• Longueur nominale des cartouches: 30 in. (75 cm)
• Diamètre: 7.0 cm (2.75 in.)
• Surface de filtration: 1.26 m²
• Impuretés: ≤0.5 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
• Extractibles par gravimétrie: ≤150 mg
• Dimension de pores: 0.3 μm nominal pore size; 0.3 μm pore size
• Entrée: sample type liquid
• Code de la cartouche: Code F (double open end w/flat gaskets)

Description

Description générale

Device Configuration: Cartridge

Notes préparatoires

Sanitization Protocol
30 min with hot water @ 80 °C

Sterilization Method
10 autoclave cycles or SIP @ 126 °C for 30 min

Remarque sur l'analyse

Gravimetric Extractables: after 24-h soak in water

Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥15 L

Autres remarques

Directions for Use

• Organism Retention: Microorganism reduction
• Mode of Action: Filtration (nominal)
• Application: BioProcessing
• Intended Use: Efficient particle and microorganism reduction
• Instructions for Use: Please refer to the Polygard^® and CLARIGARD^® Cartridges user guide
• Storage Statement: Store in dry location
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Informations légales

CLARIGARD is a registered trademark of Merck KGaA, Darmstadt, Germany

POLYGARD is a registered trademark of Merck KGaA, Darmstadt, Germany