The empty bottle is tested to withstand at least 36 psi, but it is not tested once the bottle contains the product. It is not typical to pressure-transfer from one of these HDPE bottles. The product should be transferred into a secondary container from which it is suitable for pressure transfer.
901621
Buffered oxide etchant (BOE) 10:1
Synonyme(s) :
BHF, Buffered HF
Se connecterpour consulter vos tarifs contractuels et ceux de votre entreprise/organisme
Sélectionner une taille de conditionnement
1 L
130.00 CHF
Sélectionner une taille de conditionnement
Changer de vue
1 L
130.00 CHF
About This Item
Code UNSPSC :
12161700
Nomenclature NACRES :
NA.23
Produits recommandés
Forme
liquid
Catégories apparentées
Description générale
Buffered oxide etchant (BOE) is a wet etchant used in microfabrication. Its primary use is in etching thin films of silicon dioxide (SiO2) or silicon nitride (Si3N4). It is a mixture of a buffering agent, such as ammonium fluoride (NH4F), and hydrofluoric acid (HF). Concentrated HF etches silicon dioxide too quickly for good process control and also peels photoresist used in lithographic patterning.
Application
Buffered oxide etchant (BOE) 10:1 can be used in the etching of titanium carbide, which can be used in microelectromechanical systems (MEMS).[1] It can also be used in the etching of spin-on-dopant (SOD) for the development of conductor-insulator-conductor tunneling diodes.[2] It can also be used to enhance the surface of fused quartz devices.[3]
Mention d'avertissement
Danger
Mentions de danger
Classification des risques
Acute Tox. 2 Dermal - Acute Tox. 3 Inhalation - Acute Tox. 3 Oral - Eye Dam. 1 - Skin Corr. 1B
Code de la classe de stockage
6.1B - Non-combustible acute toxic Cat. 1 and 2 / very toxic hazardous materials
Classe de danger pour l'eau (WGK)
WGK 2
Point d'éclair (°F)
Not applicable
Point d'éclair (°C)
Not applicable
Faites votre choix parmi les versions les plus récentes :
Déjà en possession de ce produit ?
Retrouvez la documentation relative aux produits que vous avez récemment achetés dans la Bibliothèque de documents.
Les clients ont également consulté
Study on surface roughness improvement of Fused Quartz after thermal and chemical post-processing
2016 IEEE International Symposium on Inertial Sensors and Systems, 31(8), 101-104 (2016)
New process development for planar-type CIC tunneling diodes
Choi K, et al.
IEEE Electron Device Letters, 31(8), 809-811 (2010)
Integration of wear-resistant titanium carbide coatings into MEMS fabrication processes
Radhakrishnan G, et al.
Tribology Letters, 8(2-3), 133-137 (2000)
-
I’m considering using nitrogen pressure to dispense Buffered Oxide Etch from your containers. The pressure I plan to use is approximately 2 ATM (1 ATM above atmospheric pressure). Can you confirm if the bottles are rated to safely handle this pressure?
1 answer-
Helpful?
-
Active Filters
Notre équipe de scientifiques dispose d'une expérience dans tous les secteurs de la recherche, notamment en sciences de la vie, science des matériaux, synthèse chimique, chromatographie, analyse et dans de nombreux autres domaines..
Contacter notre Service technique
