901083

Silver nanoparticles ink for inkjet printing

• Synonyme(s) : Ag ink, Conductive ink, Smart Jet C47NJET01030 conductive ink
• Formule linéaire : Ag
• Code UNSPSC : 12141740
• Nomenclature NACRES : NA.23

Propriétés

• Description: Resistivity: 1.5 mΩ/sq, per 25 μm (by digital printing using DIMATIX DMP 2800-Cartridge 10 pL, oven curing at 150 °C for 30 min.)
• Niveau de qualité: 100
• Forme: liquid
• Couleur: dark brown to blue
• Tension de surface: 29 mN/m±3 mN/m
• Viscosité: 13 mPa.s±3 mPa.s(20 °C)
• Capacité: 20±1 % loading (Nanoparticles loading)
• Température de stockage: 2-8°C

Description

Description générale

Smart′Ink S-CS01130 conductive ink was developed for the printed electronics, is particularly well suited for applications requiring high conductivity and high resolution. This ink, based on silver, is perfectly adapted to design conductive traces on flexible substrates. This non-toxic nano silver ink is suited to design high resolution conductive patterns on flexible substrates for applications such as antennas, sensors, OPV and OLED grids, electrodes and touchscreen bezel busbars.
Smart′Ink S-CS01130 conductive ink shows improved jetting performance and is successfully used on different tools such as Drop on Demand (DOD) inkjet printer FUJIFILM Dimatix, or such as digital micro-dispensing inkjet printer Microdrop and Microfab.

Caractéristiques et avantages

Product benefits:

• Very high electrical conductivity.
• Low curing temperature for printing on flexible substrates.
• Non CMR ink.
• Compatible with various curing process including photonic, IR, low vacuum oven and thermal.
• Unchanged conductivity on bending.
• Good adhesion (5B-ASTM D3359) on various flexible substrates (PET, PEN and Kapton).Recommended surface treatment: temperature stabilization, argon plasma.

Notes préparatoires

• Qualified printheads: RICOH (MH5420), XAAR (1003 GS6, 128), KONIKA MINOLTA (KM512SHx, KM1024iMHE, KM1024LHB), FUJIFILM (Dimatrix DMP series cartridge)
• Storage stability: 6 months (fridge)
• Sintering conditions:

Tunnel furnace: 120°C/5min for 20mW.cm; 150°C/5min for 6mW.cm; 180°C/5min for 3.8mW.cm; 200°C/5min for 2.8mW.cm.
NIR: few seconds for 4-10mW.cm.
Photonic curing: <100 ms for 3-10mW.cm.

Typical processing guideline

• Smart′Ink S-CS01130 conductive ink is warmed to room temperature (about 10 minutes) and left for 5 minutes in an ultrasonic bath in order to get rid of any aggregates.
• Filtration on a 0.45 μm PTFE filter syringe to avoid any nozzles clogging.

Informations légales

Product of Genes′Ink.

Informations sur la sécurité

• Pictogrammes: GHS02,GHS08,GHS05,GHS07,GHS09
• Mention d'avertissement: Danger
• Mentions de danger: H226,H304,H315,H317,H318,H410
• Conseils de prudence: P210 - P273 - P280 - P301 + P310 - P305 + P351 + P338 - P331
• Classification des risques: Aquatic Acute 1 - Aquatic Chronic 1 - Asp. Tox. 1 - Eye Dam. 1 - Flam. Liq. 3 - Skin Irrit. 2 - Skin Sens. 1
• Code de la classe de stockage: 3 - Flammable liquids
• Classe de danger pour l'eau (WGK): WGK 3
• Point d'éclair (°F): 104.0 °F
• Point d'éclair (°C): 40 °C