Accéder au contenu
MilliporeSigma
  • Enzymatic Analysis of Positional Fatty Acid Distributions in Triacylglycerols by 1(3)-Selective Transesterification with Candida antarctica Lipase B: a Collaborative Study.

Enzymatic Analysis of Positional Fatty Acid Distributions in Triacylglycerols by 1(3)-Selective Transesterification with Candida antarctica Lipase B: a Collaborative Study.

Journal of oleo science (2015-11-03)
Yomi Watanabe, Shinichi Sato, Mihoko Asada, Toshiharu Arishima, Yasuhiro Iida, Jun Imagi, Katsuyoshi Saito, Takashi Sano, Akiko Sasaki, Ryo Sasaki, Chiemi Sato, Tadahisa Shibuya, Yuki Tsukahara, Toshiharu Nagai, Toru Fukazawa, Ryuji Hori, Rika Homma, Yosuke Miyazaki, Atsushi Yamashita, Kazuaki Yoshinaga, Shimpei Watanabe
RÉSUMÉ

The positional distributions of fatty acids (FAs) in fats and oils are principally analyzed by selectively transesterifying the target triacylglycerols (TAGs) at the 1(3) position using Pseudozyma (Candida) antarctica lipase, followed by recovering the resulting 2-monoacylglycerols (MAGs) by chromatography. FA compositions were measured by gas chromatography (GC) after methylating target TAGs and 2-MAGs. The method was collaboratively evaluated by 12 laboratories by analyzing the positional FA distributions in soybean, palm, and sardine oils. The maximum reproducibility relative standard deviations for the major FAs and those at the sn-2 positions of soybean, palm, and sardine oils were 4.41% and 3.92% (18:3n-3), 4.48% and 3.82% (18:0), and 8.93 and 8.24% (14:0), respectively. The values at the sn-2 position were always low. Therefore, these results indicated that the variations were mainly caused by the FA analysis procedure, i.e., the methylation and GC analyses, rather than the enzymatic transesterification and chromatography utilized to prepare 2-MAGs from the target oil.

MATÉRIAUX
Référence du produit
Marque
Description du produit

Sigma-Aldrich
Méthanol, ACS reagent, ≥99.8%
Sigma-Aldrich
Hydroxyde de potassium, ACS reagent, ≥85%, pellets
Sigma-Aldrich
Hydroxyde de potassium, reagent grade, 90%, flakes
Sigma-Aldrich
Hydroxyde de potassium solution, 45 wt. % in H2O
Sigma-Aldrich
Hydroxyde de potassium, semiconductor grade, pellets, 99.99% trace metals basis (Purity excludes sodium content.)
Sigma-Aldrich
Méthanol, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., ≥99.8% (GC)
Supelco
Hydroxyde de potassium solution, volumetric, 8.0 M KOH (8.0N)
Sigma-Aldrich
Méthanol, Laboratory Reagent, ≥99.6%
Sigma-Aldrich
Éthanol, ACS reagent, prima fine spirit, without additive, F15 o1
Sigma-Aldrich
Hydroxyde de potassium, ≥85% KOH basis, pellets, white
Sigma-Aldrich
Méthanol, BioReagent, ≥99.93%
Sigma-Aldrich
Méthanol, Absolute - Acetone free
Sigma-Aldrich
Méthanol, ACS spectrophotometric grade, ≥99.9%
Sigma-Aldrich
Méthanol, anhydrous, 99.8%
Sigma-Aldrich
Hydroxyde de potassium, BioXtra, ≥85% KOH basis
Sigma-Aldrich
Hydroxyde de potassium, puriss., meets analytical specification of Ph. Eur., BP, 85-100.5%, pellets
Sigma-Aldrich
Méthanol, ACS reagent, ≥99.8%
Sigma-Aldrich
Hydroxyde de potassium, technical, ≥85%, powder
Sigma-Aldrich
Hydroxyde de potassium, pellets, reag. Ph. Eur., ≥85%
Sigma-Aldrich
Hydroxyde de potassium, anhydrous, ≥99.95% trace metals basis
Sigma-Aldrich
Éthanol, purum, fine spirit, denaturated with 4.8% methanol, F25 METHYL1, ~96% (based on denaturant-free substance)
Sigma-Aldrich
Méthanol, ACS reagent, ≥99.8%
Sigma-Aldrich
Sodium methoxide, reagent grade, 95%, powder
Sigma-Aldrich
Méthylate de sodium solution, 25 wt. % in methanol
Supelco
Ethanol solution, certified reference material, 2000 μg/mL in methanol
Sigma-Aldrich
Hydroxyde de potassium, puriss. p.a., ≥86% (T), pellets
Sigma-Aldrich
Méthanol, puriss., meets analytical specification of Ph Eur, ≥99.7% (GC)
Sigma-Aldrich
Méthylate de sodium solution, ACS reagent, 0.5 M CH3ONa in methanol (0.5N)
Sigma-Aldrich
Méthanol, NMR reference standard
Sigma-Aldrich
Methanol solution, NMR reference standard, 4% in methanol-d4 (99.8 atom % D), NMR tube size 3 mm × 8 in.