Accéder au contenu
MilliporeSigma

Detection of 34 plasticizers and 25 flame retardants in indoor air from houses in Sapporo, Japan.

The Science of the total environment (2014-04-29)
Shinji Takeuchi, Hiroyuki Kojima, Ikue Saito, Kazuo Jin, Satoshi Kobayashi, Toshiko Tanaka-Kagawa, Hideto Jinno
RÉSUMÉ

Various plasticizers and flame retardants are contained in building materials and furniture produced for indoor environments. However, some of these material inclusions have been reported to cause endocrine-disrupting and mucosa-irritating effects. Because of the local climate, buildings in Sapporo are better insulated against cold weather than those in many other areas in Japan. In this study, we measured 59 compounds, including plasticizers (phthalates, adipates, and others) and flame retardants (organo-phosphates and brominated compounds), from indoor air samples from six houses in Sapporo. These compounds were measured separately in the gas phase and the particle phase using a two-stage cartridge equipped with a quartz fiber filter (1 μm mesh) and C18 solid-phase extraction disk for sampling and analyzed by GC/MS and LC/MS/MS (for the detection of brominated flame retardants). Among the 59 compounds measured in this study, 34 compounds were detected from the indoor air of the six houses. The highest concentration among the 34 compounds found in a newly built house was 2,2,4-trimethyl-1,3-pentanediol monoisobutyrate (TXIB) at 20.8 μg/m(3). Di(2-ethyl-1-hexyl)terephthalate (DEHT), which has been used in recent years as an alternative to di(2-ethyl-1-hexyl)phthalate (DEHP), was found in all six houses, although at low concentrations ranging from 0.005 to 0.027 μg/m(3). To our knowledge, this is the first report of DEHT in indoor air in Japan. Among the compounds detected in this study, those with lower molecular weights tended to be captured in the C18 solid-phase extraction disk rather than in the quartz fiber filter. These results suggest that compounds with higher volatility exist preferentially in the gas phase, whereas compounds with lower volatility exist preferentially in the particulate phase in indoor air.

MATÉRIAUX
Référence du produit
Marque
Description du produit

Sigma-Aldrich
Acétone, ACS reagent, ≥99.5%
Sigma-Aldrich
Acétone, suitable for HPLC, ≥99.9%
Sigma-Aldrich
Acétone, HPLC Plus, for HPLC, GC, and residue analysis, ≥99.9%
Sigma-Aldrich
Acétone, Laboratory Reagent, ≥99.5%
Sigma-Aldrich
Acétone, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., ≥99.5% (GC)
Sigma-Aldrich
Acétone, suitable for HPLC, ≥99.8%
Sigma-Aldrich
Acétone, ACS reagent, ≥99.5%
USP
Acétone, United States Pharmacopeia (USP) Reference Standard
Sigma-Aldrich
Acétone, histological grade, ≥99.5%
Sigma-Aldrich
Acétone, puriss., meets analytical specification of Ph. Eur., BP, NF, ≥99% (GC)
Sigma-Aldrich
Acétone, natural, ≥97%
Sigma-Aldrich
Anthracène-d10, 98 atom % D
Sigma-Aldrich
Acétone, ≥99%, meets FCC analytical specifications
Supelco
Acétone, analytical standard
Supelco
Acétone, Pharmaceutical Secondary Standard; Certified Reference Material
Sigma-Aldrich
Acétone, suitable for HPLC, ≥99.9%