Accéder au contenu
MilliporeSigma

A new look at old agents for pleurodesis: nitrogen mustard, sodium hydroxide, and silver nitrate.

Current opinion in pulmonary medicine (2000-07-27)
F S Vargas, A O Carmo, L R Teixeira
RÉSUMÉ

In this review we analyze the evolution of pleurodesis. In spite of the fact that this procedure started in the beginning of the 20th century, the ideal sclerosing agent is not yet known. Emphasis is placed on the current tendency toward minimally invasive procedures in which insertion of catheters is favored over surgical procedures such as placement of chest tubes or thoracoscopy. Among the sclerosing agents, talc is preferred throughout the world. However, the possible development of acute respiratory distress syndrome, which is sometimes fatal, caused the awakening of interest in other drugs. Nitrogen mustard induces pleurodesis but causes important side effects. Sodium hydroxide and silver nitrate are effective and may be used in humans beings.

MATÉRIAUX
Référence du produit
Marque
Description du produit

Sigma-Aldrich
Hydroxyde de sodium, ACS reagent, ≥97.0%, pellets
Sigma-Aldrich
Nitrate d′argent, ACS reagent, ≥99.0%
Sigma-Aldrich
Hydroxyde de sodium, reagent grade, ≥98%, pellets (anhydrous)
Sigma-Aldrich
Hydroxyde de sodium solution, 50% in H2O
Sigma-Aldrich
Hydroxyde de sodium solution, BioUltra, for molecular biology, 10 M in H2O
Sigma-Aldrich
Nitrate d′argent, ReagentPlus®, ≥99.0% (titration)
Sigma-Aldrich
Hydroxyde de sodium, BioXtra, ≥98% (acidimetric), pellets (anhydrous)
Sigma-Aldrich
Hydroxyde de sodium solution, 1.0 N, BioReagent, suitable for cell culture
Sigma-Aldrich
Hydroxyde de sodium, puriss., meets analytical specification of Ph. Eur., BP, NF, E524, 98-100.5%, pellets
Sigma-Aldrich
Hydroxyde de sodium, reagent grade, 97%, powder
Sigma-Aldrich
Hydroxyde de sodium, pellets, semiconductor grade, 99.99% trace metals basis
Sigma-Aldrich
Hydroxyde de sodium, puriss. p.a., ACS reagent, reag. Ph. Eur., K ≤0.02%, ≥98%, pellets
Sigma-Aldrich
Nitrate d′argent, 99.9999% trace metals basis
Sigma-Aldrich
Hydroxyde de sodium solution, 5.0 M
Sigma-Aldrich
Nitrate d′argent, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., ≥99.8%
Sigma-Aldrich
Hydroxyde de sodium, puriss. p.a., ACS reagent, K ≤0.02%, ≥98.0% (T), pellets
Sigma-Aldrich
Hydroxyde de sodium, beads, 16-60 mesh, reagent grade, 97%
Sigma-Aldrich
Ascarite®, Sodium hydroxide-coated silica, 20-30 mesh
Sigma-Aldrich
Hydroxyde de sodium, reagent grade, 97%, flakes
Sigma-Aldrich
Nitrate d′argent, puriss. p.a., ≥99.5% (AT)
Sigma-Aldrich
Nitrate d′argent, meets analytical specification of Ph. Eur., BP, USP, 99.8-100.5%
Sigma-Aldrich
Hydroxyde de sodium, BioUltra, for luminescence, ≥98.0% (T), pellets
Sigma-Aldrich
Ascarite®, Sodium hydroxide-coated silica, 8-20 mesh
Sigma-Aldrich
Nitrate d′argent, BioReagent, suitable for plant cell culture, >99% (titration)
Sigma-Aldrich
Nitrate d′argent solution, 2.5 % (w/v) AgNO3 in H2O
Sigma-Aldrich
Hydroxyde de sodium, ultra dry, powder or crystals, 99.99% trace metals basis
Sigma-Aldrich
Hydroxyde de sodium solution, purum, ≥32%
Supelco
Hydroxyde de sodium solution, 0.1 M NaOH in water (0.1N), Eluent concentrate for IC
Sigma-Aldrich
Silver nitrate on silica gel, extent of labeling: ~10 wt. % loading, +230 mesh
Supelco
Hydroxyde de sodium solution, 49-51% in water, eluent for IC