Accéder au contenu
MilliporeSigma
Toutes les photos(3)

Documents

PPB013

Sigma-Aldrich

1.0% Agarose in Tris-Borate EDTA Buffer

pHast Pack™, powder

Synonyme(s) :

1% Agarose gel, TAE Agarose blend, TBE Agarose blend, TBE buffer garose blend

Se connecterpour consulter vos tarifs contractuels et ceux de votre entreprise/organisme
Toutes les photos(3)

About This Item

Code UNSPSC :
41105317
Nomenclature NACRES :
NA.25

Gamme de produits

pHast Pack™

Niveau de qualité

100

Forme

powder

pH

8.1-8.5(range for the Tris Borate ETDA buffer prior to blending with agarose)

Traces de cations

Pb: ≤5 ppm

Activité étrangère

DNase, none detected
Endonuclease
Exonuclease, none detected
NICKase, none detected
RNase, none detected

Catégories apparentées

Description générale

1% Agarose in Tris Borate EDTA (TBE buffer, pH 8.3) is a powder blend that dissolves easily in boiling water to quickly make an agarose gel for electrophoresis. Typically, 1% Agarose gel can separate DNA or RNA fragments between a range of 300 – 7,000 bp

Application

1% Agarose gel in 1X TBE buffer may be used for:
  • DNA electrophoresis
  • Native RNA Electrophoresis

Caractéristiques et avantages

  • Ready-to-pour 1% agarose gel eliminates buffer prep
  • Accelerates workflow and minimize cost and labor
  • Biological tests: free of DNase, RNase, Protease, and Nickase
  • Chemical tests: Iron ≤10 ppm Lead ≤5 ppm
  • Compatible with TBE pHast pack™ buffer

Conditionnement

Foil pouches

Notes préparatoires

Each packet prepares 250mL of molten agarose that is typically used to cast horizontal gels. A small electrophoresis apparatus may use 30 - 50mL, medium 100mL, and large rigs 250mL. Add nucleic acid stain before pouring the gel. For optimal results pair with pHast pack running buffer 1X TBE, pH 7.3.

Reconstitution

Contents of one pouch, when dissolved in 250 mL of ultrapure water, will yield a 1× solution containing 89 mM Tris borate, 2 mM EDTA, and 1.0% (w/v) agarose. Certified to be DNAse, RNAse, and Nickase free. Prepare in a 1L flask. Combine pHast pack contents with 250 mL ultrapure water and mix well. Microwave on high for ~1min to boil and dissolve the agarose. Use a heat resistant glove to remove the flask every 10 - 15s to mix gently by swirling the liquid in a circle at the bottom of the flask. Repeat until the agarose is fully dissolved. Cool the flask slightly with cold water while swirling every 10 – 15s, add the stain and pour the gel. Allow agarose gel to fully cool and solidify before removing combs.

Stockage et stabilité

Store at room temperature. Product may naturally agglomerate but can be simply broken up within the pouch prior to use.

Autres remarques

For additional information on our range of Biochemicals, please complete this form.

Informations légales

pHast Pack is a trademark of Sigma-Aldrich Co. LLC

Pictogrammes

Health hazard
GHS08

Mention d'avertissement

Danger

Mentions de danger

H360FD

Classification des risques

Repr. 1B

Code de la classe de stockage

6.1C - Combustible acute toxic Cat.3 / toxic compounds or compounds which causing chronic effects

Classe de danger pour l'eau (WGK)

WGK 1

Choose from one of the most recent versions:

Certificats d'analyse (COA)

Lot/Batch Number

Sorry, we don't have COAs for this product available online at this time.

If you need assistance, please contact Service Clients

Déjà en possession de ce produit ?

Retrouvez la documentation relative aux produits que vous avez récemment achetés dans la Bibliothèque de documents.

Consulter la Bibliothèque de documents

Notre équipe de scientifiques dispose d'une expérience dans tous les secteurs de la recherche, notamment en sciences de la vie, science des matériaux, synthèse chimique, chromatographie, analyse et dans de nombreux autres domaines..

Contacter notre Service technique