CW0673SB1

Bevigard^™-M Cartridge Filter

pore size 0.5 μm, cartridge nominal length 30 in. (75 cm), Code 7 (2-226; O-ring and spear)

• Synonyme(s) : Bevigard^™-M Cartridge Filter 30 in. Code 7 0.5 μm
• Code UNSPSC : 23151806
• eCl@ss : 32031610

Propriétés

• Matériaux: mixed cellulose esters (MCE) ; polyester support; polypropylene ; silicone seal
• Conformité réglementaire: meets EU framework regulation [1935/2004/EC] (all component materials; regarding materials and articles intended to contact food); meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
• Fabricant/nom de marque: Bevigard^™
• Paramètres: 3.5 bar max. differential pressure (50 psid) at 25 °C
• Longueur nominale des cartouches: 30 in. (75 cm)
• Diamètre: 7.1 cm (2.8 in.)
• Surface de filtration: 2.4 m²
• Impuretés: ≤0.5 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
• Extractibles par gravimétrie: ≤150 mg/cartridge
• Matrice: Bevigard^™-M
• Dimension de pores: 0.5 μm nominal pore size; 0.5 μm pore size
• Entrée: sample type beer; sample type wine; sample type beverage(s); sample type food(s); sample type bottled water; sample type liquid
• Code de la cartouche: Code 7 (2-226; O-ring and spear)

Description

Description générale

Device Configuration: Cartridge

Caractéristiques et avantages

Format: Single Layer

Conditionnement

Double Easy-Open bag

Autres remarques

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.

Directions for Use:

• Organism Retention: Microorganism
• Mode of Action: Filtration (size exclusion)
• Application: BioProcessing
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer to installation and wetting sections of OptiScale^®-25 user guide and introduction section of Mixed celulose esters Tech Brief
• Storage Statement: Please refer Mixed cellulose esters Tech Brief
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Caractéristiques

Filter Grade: Standard Milligard^® Media

Notes préparatoires

Sanitization Protocol
30 min with hot water @ 80 °C

Sterilization Method
10 autoclave cycles or SIP @ 121 °C for 30 min

This product was manufactured with a media combination which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).

Remarque sur l'analyse

Gravimetric Extractables: after 24 hours in water at controlled room temperature

Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥9 L

Informations légales

Bevigard is a trademark of Merck KGaA, Darmstadt, Germany

MILLIGARD is a registered trademark of Merck KGaA, Darmstadt, Germany

OptiScale is a registered trademark of Merck KGaA, Darmstadt, Germany

Informations sur la sécurité

• Pictogrammes: GHS02
• Mention d'avertissement: Danger
• Mentions de danger: H228
• Conseils de prudence: P210 - P240 - P241 - P280 - P370 + P378
• Classification des risques: Flam. Sol. 1
• Code de la classe de stockage: 4.1B - Flammable solid hazardous materials
• Classe de danger pour l'eau (WGK): WGK 2