Accéder au contenu
MilliporeSigma
Toutes les photos(1)

Principaux documents

Voir toute la documentation

455059

Sigma-Aldrich

Bisphenol A ethoxylate dimethacrylate

average Mn ~1,700, EO/phenol 15, contains 200 ppm MEHQ as inhibitor

Synonyme(s) :

2,2-Bis(4-methacryloxypolyethoxyphenyl)propane, Bisphenol A-ethylene oxide adduct dimethacrylate, Ethoxylated bisphenol A dimethacrylate

Se connecterpour consulter vos tarifs contractuels et ceux de votre entreprise/organisme

Sélectionner une taille de conditionnement

500 ML
220,00 $

220,00 $

Veuillez contacter notre Service Clients pour connaître la disponibilité de ce produit.
Devis pour commande en gros
Toutes les photos(1)

Sélectionner une taille de conditionnement

Changer de vue
500 ML
220,00 $

About This Item

Formule linéaire :
[H2C=C(CH3)CO2(CH2CH2O)nC6H4-4-]2C(CH3)2
Numéro CAS:
41637-38-1
Numéro MDL:
MFCD03703564
Code UNSPSC :
12162002
ID de substance PubChem :
24869017
Nomenclature NACRES :
NA.23

220,00 $

Veuillez contacter notre Service Clients pour connaître la disponibilité de ce produit.
Devis pour commande en gros

Poids mol.

average Mn ~1,700

Niveau de qualité

100

Contient

200 ppm MEHQ as inhibitor
200 ppm monomethyl ether hydroquinone as inhibitor

Composition

EO/phenol, 15

Indice de réfraction

n20/D 1.493

Densité

1.12 g/mL at 25 °C (lit.)

Température de stockage

2-8°C

Chaîne SMILES 

OCCO.OC(=O)C=C.CC(C)(c1ccc(O)cc1)c2ccc(O)cc2

InChI

1S/C15H16O2.C3H4O2.C2H6O2/c1-15(2,11-3-7-13(16)8-4-11)12-5-9-14(17)10-6-12;1-2-3(4)5;3-1-2-4/h3-10,16-17H,1-2H3;2H,1H2,(H,4,5);3-4H,1-2H2

Clé InChI

HGARWRTUWINPJC-UHFFFAOYSA-N

Vous recherchez des produits similaires ? Visite Guide de comparaison des produits

Catégories apparentées

Description générale

Bisphenol A ethoxylate dimethacrylate is an acrylic cross-linker widely used as a precursor to fabricate tissue-mimicking materials for 3D printing[1], cross-linked gel electrolytes[2], and to synthesize copolymers via the photopolymerization process.[3]

Application

The Progress in Development of Dental Restorative Materials

Pictogrammes

Exclamation mark
GHS07

Mention d'avertissement

Warning

Mentions de danger

H315,H317,H319,H335

Classification des risques

Eye Irrit. 2 - Skin Irrit. 2 - Skin Sens. 1 - STOT SE 3

Organes cibles

Respiratory system

Code de la classe de stockage

10 - Combustible liquids

Classe de danger pour l'eau (WGK)

WGK 3

Point d'éclair (°F)

235.4 °F - closed cup

Point d'éclair (°C)

113 °C - closed cup

Équipement de protection individuelle

Eyeshields, Faceshields, Gloves, type ABEK (EN14387) respirator filter

Faites votre choix parmi les versions les plus récentes :

Certificats d'analyse (COA)

Lot/Batch Number
MKCV7632
MKCT9367
MKCQ9378
MKCS6403
MKCP5233

Vous ne trouvez pas la bonne version ?

Si vous avez besoin d'une version particulière, vous pouvez rechercher un certificat spécifique par le numéro de lot.

Rechercher un(e) COA

Déjà en possession de ce produit ?

Retrouvez la documentation relative aux produits que vous avez récemment achetés dans la Bibliothèque de documents.

Consulter la Bibliothèque de documents

3D printing of noncytotoxic high-resolution microchannels in Bisphenol-a ethoxylate dimethacrylate tissue-mimicking materials
Roger Domingo-Roca, et al.
3D printing and additive manufacturing (2022)
UV light copolymerization of dimethyl vinylphosphonate with bisphenol A ethoxylate dimethacrylate
Lavinia Macarie, et al.
Iranian Polymer Journal, 25, 437-442 (2016)
A study of cross-linked PEO gel polymer electrolytes using bisphenol A ethoxylate diacrylate: ionic conductivity and mechanical properties
Yongku Kang, et al.
Journal of Power Sources, 119-121, 432-437 (2003)
Sabine H Dickens et al.
European journal of oral sciences, 112(5), 452-457 (2004-10-02)
An experimental resin-based bioactive calcium phosphate cement, intended as a pulp capping and basing material, was evaluated for dentin shear bond strength and microleakage. The interfacial morphology was examined by scanning electron microscopy (SEM). For microleakage, dentin cavities without (Group
Catherine Fan et al.
Dental materials : official publication of the Academy of Dental Materials, 27(4), 322-328 (2010-11-30)
To demonstrate that silver nanoparticles (AgNPs) could be synthesized in situ in acrylic dental resins. Light-cure (LC; bisphenol A glycidyl methacrylate, tetraethyleneglycol dimethacrylate, bisphenol A ethoxylate dimethacrylate blend) and chemical-cure systems (CC; orthodontic denture resin) were used to synthesize AgNPs
Afficher tous les articles scientifiques apparentés

Articles

The Progress in Development of Dental Restorative Materials

With dentists placing nearly 100 million dental fillings into patients′ teeth annually in the U.S. alone, polymeric composite restoratives account for a very large share of the biomaterials market.

Questions

1–2 of 2 Questions  

  1. How is shipping temperature determined? And how is it related to the product storage temperature?

    1 answer

    1. Products may be shipped at a different temperature than the recommended long-term storage temperature. If the product quality is sensitive to short-term exposure to conditions other than the recommended long-term storage, it will be shipped on wet or dry-ice. If the product quality is NOT affected by short-term exposure to conditions other than the recommended long-term storage, it will be shipped at ambient temperature. As shipping routes are configured for minimum transit times, shipping at ambient temperature helps control shipping costs for our customers. For more information, please refer to the Storage and Transport Conditions document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/316/622/storage-transport-conditions-mk.pdf

      Helpful?

  2. How can I determine the shelf life / expiration / retest date of this product?

    1 answer

    1. If this product has an expiration or retest date, it will be shown on the Certificate of Analysis (COA, CofA). If there is no retest or expiration date listed on the product's COA, we do not have suitable stability data to determine a shelf life. For these products, the only date on the COA will be the release date; a retest, expiration, or use-by-date will not be displayed.
      For all products, we recommend handling per defined conditions as printed in our product literature and website product descriptions. We recommend that products should be routinely inspected by customers to ensure they perform as expected.
      For products without retest or expiration dates, our standard warranty of 1 year from the date of shipment is applicable.
      For more information, please refer to the Product Dating Information document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/449/386/product-dating-information-mk.pdf

      Helpful?

Reviews

No rating value

Active Filters

Notre équipe de scientifiques dispose d'une expérience dans tous les secteurs de la recherche, notamment en sciences de la vie, science des matériaux, synthèse chimique, chromatographie, analyse et dans de nombreux autres domaines..

Contacter notre Service technique