Accéder au contenu
MilliporeSigma
Toutes les photos(1)

Principaux documents

Voir toute la documentation

332461

Sigma-Aldrich

Graphite

flakes

Se connecterpour consulter vos tarifs contractuels et ceux de votre entreprise/organisme

Sélectionner une taille de conditionnement

2.5 KG
138,00 $
12 KG
476,00 $

138,00 $

Veuillez contacter notre Service Clients pour connaître la disponibilité de ce produit.
Devis pour commande en gros
Toutes les photos(1)

Sélectionner une taille de conditionnement

Changer de vue
2.5 KG
138,00 $
12 KG
476,00 $

About This Item

Formule empirique (notation de Hill) :
C
Numéro CAS:
7782-42-5
Poids moléculaire :
12.01
Numéro CE :
231-955-3
Numéro MDL:
MFCD00144065
Code UNSPSC :
12352300
ID de substance PubChem :
24859898
Nomenclature NACRES :
NA.23

138,00 $

Veuillez contacter notre Service Clients pour connaître la disponibilité de ce produit.
Devis pour commande en gros

Forme

flakes

Taille des particules

+100 mesh (≥75% min)

Pf

3652-3697 °C (lit.)

Chaîne SMILES 

[C]

InChI

1S/C

Clé InChI

OKTJSMMVPCPJKN-UHFFFAOYSA-N

Vous recherchez des produits similaires ? Visite Guide de comparaison des produits

Catégories apparentées

Code de la classe de stockage

11 - Combustible Solids

Classe de danger pour l'eau (WGK)

nwg

Point d'éclair (°F)

Not applicable

Point d'éclair (°C)

Not applicable

Équipement de protection individuelle

dust mask type N95 (US), Eyeshields, Gloves

Faites votre choix parmi les versions les plus récentes :

Certificats d'analyse (COA)

Lot/Batch Number
SHBQ8334
SHBQ1020
MKBW0432V
SHBL3825
SHBL3822

Vous ne trouvez pas la bonne version ?

Si vous avez besoin d'une version particulière, vous pouvez rechercher un certificat spécifique par le numéro de lot.

Rechercher un(e) COA

Déjà en possession de ce produit ?

Retrouvez la documentation relative aux produits que vous avez récemment achetés dans la Bibliothèque de documents.

Consulter la Bibliothèque de documents

Les clients ont également consulté

Slide 1 of 5

1 of 5

Graphite dispersion multi-layers (8-30 layers), avg. no. of layers, 8 ‑ 30

Sigma-Aldrich

902926

Graphite dispersion

Graphite rod, L 150 mm, diam. 3 mm, low density, 99.995% trace metals basis

Sigma-Aldrich

496537

Graphite

Carbon foil, 5x5mm, thickness 2.0mm, hOpg

GF71469939

Carbon

Graphite, fluorinated, polymer extent of labeling: >61 wt. % F

Sigma-Aldrich

372455

Graphite, fluorinated, polymer

Graphene oxide powder, 15-20 sheets, 4-10% edge-oxidized, avg. no. of layers, 15 ‑ 20

Sigma-Aldrich

796034

Graphene oxide

Raghvendra Singh Yadav et al.
Nanomaterials (Basel, Switzerland), 9(4) (2019-04-19)
Herein, we presented electromagnetic interference shielding characteristics of NiFe2O4 nanoparticles-in-situ thermally-reduced graphene oxide (RGO)-polypropylene nanocomposites with the variation of reduced graphene oxide content. The structural, morphological, magnetic, and electromagnetic parameters and mechanical characteristics of fabricated nanocomposites were investigated and studied
Izabela Jurewicz et al.
Advanced functional materials, 30(31), 2002473-2002473 (2020-08-11)
High quality opal-like photonic crystals containing graphene are fabricated using evaporation-driven self-assembly of soft polymer colloids. A miniscule amount of pristine graphene within a colloidal crystal lattice results in the formation of colloidal crystals with a strong angle-dependent structural color
Zheling Li et al.
ACS nano, 14(9), 10976-10985 (2020-07-01)
Liquid- phase exfoliation (LPE) is the principal method of producing two-dimensional (2D) materials such as graphene in large quantities with a good balance between quality and cost and is now widely adopted by both the academic and industrial sectors. The
Sicheng Wu et al.
Small (Weinheim an der Bergstrasse, Germany), 16(12), e1903397-e1903397 (2019-09-10)
An unprecedented microwave-based strategy is developed to facilitate solid-phase, instantaneous delamination and decomposition of graphite fluoride (GF) into few-layer, partially fluorinated graphene. The shock reaction occurs (and completes in few seconds) under microwave irradiation upon exposing GF to either "microwave-induced
Tian Carey et al.
Nature communications, 8(1), 1202-1202 (2017-11-02)
Fully printed wearable electronics based on two-dimensional (2D) material heterojunction structures also known as heterostructures, such as field-effect transistors, require robust and reproducible printed multi-layer stacks consisting of active channel, dielectric and conductive contact layers. Solution processing of graphite and other
Afficher tous les articles scientifiques apparentés

Articles

Novel Graphene‑Based Nanostructures Production, Functionalization, and Engineering

Novel Graphene‑Based Nanostructures Production, Functionalization, and Engineering

Questions

1–3 of 3 Questions  

  1. How is shipping temperature determined? And how is it related to the product storage temperature?

    1 answer

    1. Products may be shipped at a different temperature than the recommended long-term storage temperature. If the product quality is sensitive to short-term exposure to conditions other than the recommended long-term storage, it will be shipped on wet or dry-ice. If the product quality is NOT affected by short-term exposure to conditions other than the recommended long-term storage, it will be shipped at ambient temperature. As shipping routes are configured for minimum transit times, shipping at ambient temperature helps control shipping costs for our customers. For more information, please refer to the Storage and Transport Conditions document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/316/622/storage-transport-conditions-mk.pdf

      Helpful?

  2. How can I determine the shelf life / expiration / retest date of this product?

    1 answer

    1. If this product has an expiration or retest date, it will be shown on the Certificate of Analysis (COA, CofA). If there is no retest or expiration date listed on the product's COA, we do not have suitable stability data to determine a shelf life. For these products, the only date on the COA will be the release date; a retest, expiration, or use-by-date will not be displayed.
      For all products, we recommend handling per defined conditions as printed in our product literature and website product descriptions. We recommend that products should be routinely inspected by customers to ensure they perform as expected.
      For products without retest or expiration dates, our standard warranty of 1 year from the date of shipment is applicable.
      For more information, please refer to the Product Dating Information document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/449/386/product-dating-information-mk.pdf

      Helpful?

  3. Please ket me know the flake size of this product

    1 answer

    1. The particle size of the product is found to be +100 mesh (≥75% min). This mesh size converts to approximately 0.149 mm.

      Helpful?

Reviews

No rating value

Active Filters

Notre équipe de scientifiques dispose d'une expérience dans tous les secteurs de la recherche, notamment en sciences de la vie, science des matériaux, synthèse chimique, chromatographie, analyse et dans de nombreux autres domaines..

Contacter notre Service technique