Unfortunately, the bulk density of this product is not determined.
H7379
Hemoglobin human
lyophilized powder
Synonym(s):
Hb
About This Item
Recommended Products
biological source
human
Quality Level
form
lyophilized powder
technique(s)
enzyme immunoassay: suitable
impurities
HIV and hepatitis B antigen, tested negative
solubility
H2O: soluble 20 mg/mL
storage temp.
2-8°C
Gene Information
human ... HBA1(3039) , HBA2(3040) , HBB(3043) , HBD(3045) , HBE1(3046) , HBG1(3047) , HBG2(3048) , HBQ1(3049) , HBZ(3050)
General description
Application
Biochem/physiol Actions
Caution
Disclaimer
Storage Class Code
11 - Combustible Solids
WGK
WGK 3
Flash Point(F)
Not applicable
Flash Point(C)
Not applicable
Certificates of Analysis (COA)
Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.
Already Own This Product?
Find documentation for the products that you have recently purchased in the Document Library.
Customers Also Viewed
Chromatograms
application for HPLC-
Hi, what is the bulk density of this product ?
1 answer-
Helpful?
-
-
What is the % purity of the lyophilised powder of Hemoglobin Human??
1 answer-
This product is a crude preparation. The purity has not been determined. Unfortunately, purified human hemoglobin is not available at this time.
Helpful?
-
-
Is it LPS-free? when i use this hemoglobin for cell treatment, should I treat polymyxin b B also?
1 answer-
This product is not tested for endotoxin. For use with applications that may be sensitive to presence of LPS, pre-treatment with polymyxin B is a viable approach and is known to effectively neutralize endotoxins. See the link below to review product P1411 Polymyxin B-Agarose, which is recommended for endotoxin removal:
https://www.sigmaaldrich.com/US/en/product/sigma/p1411Polymyxin B-Agarose datasheet with protocol:
https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/product/documents/249/698/p1411pis.pdfHelpful?
-
-
What are the reconstitution instructions for the product, including the amount of liquid and suggested concentration? Additionally, what is the stability of the product after reconstitution?
1 answer-
The product H7379 is tested for solubility at 20 mg/ml during quality control testing. In the past, there was a hemoglobin standard available at 18g/dL or 18% in lyophilized form, mixed with Drabkins reagent to produce a stable cyanomethemoglobin solution. This reagent was stated to be stable for 6 months, with notes indicating that lower concentrations were not necessarily stable. The absorbance values for this solution are typically read at 540 nm.
After reconstitution, if blood hemoglobin levels are not being determined, it is suggested to take the absorbance in water, scanning the wavelengths from 500-700 nm. A dilution should be performed to achieve an absorbance within the general range of 0.7 to 1.5. After measuring the absorbance of the freshly prepared solution, a baseline is established, and periodic measurements of the absorbance can be taken to determine if the values are trending lower, indicating the need to prepare a fresh solution.
Helpful?
-
-
What is the hemoglobin concentration in the product H7379-1G?
1 answer-
The Specification Sheet for H7379 does not list any purity or concentration. The product is assumed to be 100% hemoglobin. Therefore, if 1 mg of H7379 is dissolved in 1 ml of deionized water, the concentration would be 1 mg/ml.
Helpful?
-
-
How is the human hemoglobin being purified/ desalted after extraction?
1 answer-
Unfortunately the manufacture method is considered proprietary.
Helpful?
-
-
I bought this product in June 2022 and have been using it and storing it properly and was wondering the shelf life of this Product H739-5G
1 answer-
This product does not contain an expiration date, it contains an recommended retest date of roughly 4 years. A recommended retest date is the period of time during which the product is expected to remain within established stability specifications, provided that it has been stored under defined conditions. After the Retest Date, product samples should be examined to ensure that the product is still in compliance with the established specifications. Please view the sample Certificate of Analysis: https://www.sigmaaldrich.com/certificates/sapfs/PROD/sap/certificate_pdfs/COFA/Q14/H7379-BULKSLCN4002.pdf
Helpful?
-
-
How many donors are used to make a batch of Product H7379, Hemoglobin human?
1 answer-
This will vary with the batch size, but may come from as many as several hundred donors. All donors are tested and found negative for antibodies to HIV-1/HIV-2, HCV, for HBSAG, and for syphilis.
Helpful?
-
-
Is Product H7379, Hemoglobin human, methemoglobin?
1 answer-
Yes. The iron in hemoglobin will oxidize by exposure to air unless special handling and packaging is used. Because this product is exposed to air during purification and packaging, it will be predominantly methemoglobin.
Helpful?
-
-
How can Product H7379, Hemoglobin human, be reduced?
1 answer-
A procedure for reduction of methemoglobin may be found in the product sheet.
Helpful?
-
Active Filters
Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.
Contact Technical Service