Skip to Content
Merck

HPLC analysis of blood-brain barrier penetration of 4-fluorodeprenyl.

Journal of pharmaceutical and biomedical analysis (2014-12-03)
Zita Pöstényi, Kornélia Tekes, Edit Tóth-Molnár, Huba Kalász
ABSTRACT

Validated HPLC analysis was developed in order to monitor the level of 4-fluorodeprenyl in rats. Male Wistar rats were intraperitoneally treated with 30 mg/kg of (-)-4-fluorodeprenyl. The rats were sacrificed after 5, 15, 30 and 60 min of treatment, and various tissues were isolated, such as serum, brain, CSF, liver, testis and lacrimal gland. Perchloric acid was given to aliquots, which were then homogenized, centrifuged and the supernatants were taken. The 4-fluorodeprenyl content was determined using reversed-phase HPLC, based on the comparison of the calibration line of the spiked samples. The level of 4-fluorodeprenyl was between 0.5 and 24 μg/g, showing maximum concentration in the brain and the liver after 5 min following its administration and in serum, CSF, testis, eyes and lacrimal gland after 15 min following its administration, while a relatively high concentration was found in the liver and the lacrimal gland.

MATERIALS
Product Number
Brand
Product Description

Sigma-Aldrich
Hydrochloric acid, meets analytical specification of Ph. Eur., BP, NF, fuming, 36.5-38%
Sigma-Aldrich
Hydrochloric acid, puriss., 24.5-26.0%
Sigma-Aldrich
Hydrogen chloride solution, 4.0 M in dioxane
Sigma-Aldrich
Hydrogen chloride solution, 2.0 M in diethyl ether
Sigma-Aldrich
Hydrogen chloride solution, 1.0 M in diethyl ether
Sigma-Aldrich
Hydrochloric acid, 37 wt. % in H2O, 99.999% trace metals basis
Sigma-Aldrich
Hydrochloric acid, ACS reagent, 37%
Sigma-Aldrich
Hydrogen chloride solution, 1.0 M in acetic acid
Sigma-Aldrich
Hydrochloric acid, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., fuming, ≥37%, APHA: ≤10
Sigma-Aldrich
Sodium phosphate dibasic solution, BioUltra, 0.5 M in H2O
Supelco
Phosphate Standard for IC, TraceCERT®, 1000 mg/L phosphate in water (nominal concentration)
Sigma-Aldrich
Hydrogen chloride solution, 3 M in cyclopentyl methyl ether (CPME)
Sigma-Aldrich
Hydrochloric acid solution, 32 wt. % in H2O, FCC
Sigma-Aldrich
Sodium 1-decanesulfonate, ≥99.0% (T)
Sigma-Aldrich
Hydrochloric acid solution, ~6 M in H2O, for amino acid analysis
Supelco
Hydrogen chloride – 2-propanol solution, ~1.25 M HCl (T), for GC derivatization, LiChropur
Supelco
Hydrogen chloride – ethanol solution, ~1.25 M HCl, for GC derivatization, LiChropur
Supelco
Hydrogen chloride – methanol solution, ~1.25 m HCl (T), for GC derivatization, LiChropur
Sigma-Aldrich
Acetonitrile solution, contains 0.1 % (v/v) trifluoroacetic acid, suitable for HPLC
Sigma-Aldrich
Hydrochloric acid solution, 1.0 N, BioReagent, suitable for cell culture
Sigma-Aldrich
Hydrochloric acid, 36.5-38.0%, BioReagent, for molecular biology
Supelco
Hydrochloric acid solution, volumetric, 0.1 M HCl (0.1N), endotoxin free
Sigma-Aldrich
Sodium 1-decanesulfonate, ~98%
Supelco
Residual Solvent - Acetonitrile, Pharmaceutical Secondary Standard; Certified Reference Material
Sigma-Aldrich
Hydrochloric acid, ACS reagent, 37%
Supelco
Sodium 1-decanesulfonate, suitable for ion pair chromatography, LiChropur, ≥99.0%
Supelco
Perchloric acid, 0.01 M HClO4 in water (0.01N), eluent for IC
Citric acid monohydrate, European Pharmacopoeia (EP) Reference Standard
Sigma-Aldrich
Acetonitrile, electronic grade, 99.999% trace metals basis
Supelco
Acetonitrile, analytical standard