SGW1A47FH3

Polysep^™ II 1.0/0.2/0.1 µm nominal, OptiScale^® Capsule

OptiScale^® 47, filtration area 17.7 cm², pore size 1.0/0.2/0.1 μm

• Synonyme(s) : Optiscale Capsule Polysep II 1.0/0.2/0.1 μm 3/4 in. TC-1/4 in. HB
• Code UNSPSC : 23151806
• eCl@ss : 32031690

Propriétés

• Matériaux: PVDF vent cap; borosilicate glass fiber (BGF) membrane; fluoroelastomer FKM seal; mixed cellulose esters (MCE) membrane; polycarbonate ; polypropylene support
• Niveau de qualité: 400
• Conformité réglementaire: meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
• Stérilité: non-sterile
• Mode de stérilisation compatible: autoclavable compatible
• Gamme de produits: OptiScale^® 47
• Caractéristiques: hydrophilic
• Fabricant/nom de marque: OptiScale^®
• Paramètres: 25 °C max. inlet temp.; 5.5 bar max. inlet pressure (80 psi) at 25 °C; 80 psig max. inlet pressure
• Technique(s): prefiltration: suitable
• Diamètre: 6.9 cm (2.7 in.)
• Surface de filtration: 17.7 cm²
• Diam. du raccord d'entrée: 3/4 in.
• Diam. du raccord de sortie: 1/4 in.
• Impuretés: ≤0.25 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
• Matrice: Polysep^™ II
• pore size: 1.0/0.2/0.1 μm nominal pore size; 1.0/0.2/0.1 μm pore size
• Entrée: sample type liquid
• Raccords: inlet sanitary flange; outlet hose barb; (19 mm (3/4 in.) Sanitary Flange Inlet and 6 mm (1/4 in.) Hose Barb Outlet)

Description

Description générale

Device Configuration: Capsule

Caractéristiques et avantages

Format: Triple Layer

Autres remarques

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.

Directions for Use

• Organism Retention: Bacterial
• Mode of Action: Filtration (size exclusion)
• Application: Protein purification
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer installation and wetting sections of OPTISCALE^®-25 user guide
• Storage Statement: Please refer OPTISCALE^®-25 user guide
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Notes préparatoires

Sterilization Method
3 autoclave cycles of 60 min @ 121 °C

Remarque sur l'analyse

Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥100 mL

Informations légales

OptiScale is a registered trademark of Merck KGaA, Darmstadt, Germany

Polysep is a trademark of Sigma-Aldrich Co. LLC

Informations sur la sécurité

• Pictogrammes: GHS08
• Mention d'avertissement: Danger
• Mentions de danger: H350i
• Conseils de prudence: P201 - P202 - P280 - P308 + P313 - P405 - P501
• Classification des risques: Carc. 1B Inhalation
• Code de la classe de stockage: 4.1B - Flammable solid hazardous materials
• Classe de danger pour l'eau (WGK): WGK 2