CVBH73PK1

Brewpore^® Cartridge Filter

pore size 0.55 μm, cartridge nominal length 30 in. (75 cm), Code 7 (2-226; O-rings w/locking-tabs)

• Synonyme(s) : Brewpore <TMSYMBOL></TMSYMBOL> Cartridge Filter 30 in. 0.55 μm Code 7
• Code UNSPSC : 23151806
• eCl@ss : 32031690

Propriétés

• Matériaux: PVDF ; polypropylene ; polypropylene support; silicone seal
• Conformité réglementaire: meets EU framework regulation [1935/2004/EC] (all component materials; regarding materials and articles intended to contact food); meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
• Stérilité: sterile
• Caractéristiques: hydrophobic
• Fabricant/nom de marque: Brewpore^®
• Paramètres: ≤22.5 mL/min air diffusion at 830 mbar (12 psig) and 23 °C (in water); 0.35 bar max. differential pressure (5 psid) at 121 °C (Forward); 0.35 bar max. differential pressure (5 psid) at 121 °C (Reverse); 1.7 bar max. differential pressure (25 psid) at 80 °C (Forward); 3.5 bar max. differential pressure (50 psid) at 25 °C (Reverse; intermittent); 5.5 bar max. differential pressure (80 psid) at 25 °C (Forward); 60 L/min flow rate at 330 mbar (ΔP)
• Longueur nominale des cartouches: 30 in. (75 cm)
• Diamètre: 6.9 cm (2.7 in.)
• Surface de filtration: 2.25 m²
• Extractibles par gravimétrie: ≤90 mg/cartridge
• Matrice: Brewpore^®
• Dimension de pores: 0.55 μm nominal pore size; 0.55 μm pore size
• Entrée: sample type beer; sample type bottled water; sample type wine; sample type beverage(s); sample type liquid; sample type food(s)
• Point de bulle: ≥965 mbar (14 psig), air with water at 23 °C
• Code de la cartouche: Code 7 (2-226; O-rings w/locking-tabs)

Description

Description générale

Device Configuration: Cartridge

Autres remarques

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.

Directions for Use

• Organism Retention: Microorganism
• Mode of Action: Filtration (size exclusion)
• Application: BioProcessing
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer Wetting Instructions for Filter Units with Durapore^® Membrane user guide
• Storage Statement: Store in a dry location.
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Notes préparatoires

Sterilization Method
100 SIP cycles of 30 min @ 109 °C; hot water sanitized 50 times for 30 min @ 80 °C maximum

This product was manufactured with a Durapore^® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).

Remarque sur l'analyse

Gravimetric Extractables: after 24 hours in a 70/30% IPA/water mixture at controlled room temperature

Informations légales

BREWPORE is a registered trademark of Merck KGaA, Darmstadt, Germany

Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany