1.17349
MAS-100 Atmos® Gas Exhaust Tube Set
for use with MAS-100 Atmos®
Se connecterpour consulter vos tarifs contractuels et ceux de votre entreprise/organisme
Sélectionner une taille de conditionnement
1 EACH
3 490,00 €
Sélectionner une taille de conditionnement
Changer de vue
1 EACH
3 490,00 €
About This Item
Code UNSPSC :
41103403
Nomenclature NACRES :
NA.74
Produits recommandés
Matériaux
PVC tubing
stainless steel adapter
Caractéristiques
autoclavable
Fabricant/nom de marque
MAS-100 Atmos®
Longueur du tuyau
5.0 m
Application(s)
compressed gas monitoring
cosmetics
food and beverages
pharmaceutical
Compatibilité
for use with MAS-100 Atmos®
Description générale
The MAS-100 Atmos® Gas Exhaust Tube Set is an accessory for MAS-100 Atmos® Microbial Compressed Gas Sampler for safe sampling of gases and prevent intoxication or contamination of the environment.
In case, if only the adapter for gas exhaust tubing (product 1.17348) is required for an alternative tubing, it must be ensured that the tubing that is used has a minimum inner diameter of 32 mm and a maximum length of 5 m. These are the conditions validated by the manufacturer.
The connector piece of the Gas Exhaust Tube is connected to the exhaust of the MAS-100 Atmos® instrument. The tubing is fixed to the connector with the tri-clamp. The end of the tubing is open and can be adapted on site to the respective application.
The tubing can be disinfected by spray or wipe disinfection with 70% ethanol or 70% IPA. The stainless-steel connector itself can be autoclaved at ? 134°C for 5mins or 121°C for 20 min.
In case, if only the adapter for gas exhaust tubing (product 1.17348) is required for an alternative tubing, it must be ensured that the tubing that is used has a minimum inner diameter of 32 mm and a maximum length of 5 m. These are the conditions validated by the manufacturer.
The connector piece of the Gas Exhaust Tube is connected to the exhaust of the MAS-100 Atmos® instrument. The tubing is fixed to the connector with the tri-clamp. The end of the tubing is open and can be adapted on site to the respective application.
The tubing can be disinfected by spray or wipe disinfection with 70% ethanol or 70% IPA. The stainless-steel connector itself can be autoclaved at ? 134°C for 5mins or 121°C for 20 min.
Application
MAS-100 Atmos® Microbial Compressed Gas Sampler is used to sample pre-defined compressed gases like argon, carbon dioxide, compressed air, and nitrogen from pharmaceutical, cosmetic, food & beverage industry.
Caractéristiques et avantages
- Removes potentially toxic gas out of the sampling environment.
- 5 m distance between instrument exhaust and room exhaust.
Composants
The MAS-100 Atmos® Gas Exhaust Tube Set consists of:
- 5m PVC Tube.
- Stainless Steel Connector.
- Tri-clamp (50.5mm)
- Silicone Gasket.
Informations légales
MAS-100 Atmos is a registered trademark of MBV AG
Produit(s) apparenté(s)
Certificats d'analyse (COA)
Recherchez un Certificats d'analyse (COA) en saisissant le numéro de lot du produit. Les numéros de lot figurent sur l'étiquette du produit après les mots "Lot" ou "Batch".
Déjà en possession de ce produit ?
Retrouvez la documentation relative aux produits que vous avez récemment achetés dans la Bibliothèque de documents.
Active Filters
Notre équipe de scientifiques dispose d'une expérience dans tous les secteurs de la recherche, notamment en sciences de la vie, science des matériaux, synthèse chimique, chromatographie, analyse et dans de nombreux autres domaines..
Contacter notre Service technique
