This product is Propylene glycol monomethyl ether acetate. It is intended for use in a chemistry lab setting and should not be used on human or animal subjects.
484431
Propylene glycol monomethyl ether acetate
ReagentPlus®, ≥99.5%
Sinónimos:
DOWANOL® PMA
Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización
About This Item
Fórmula lineal:
CH3CO2CH(CH3)CH2OCH3
Número de CAS:
Peso molecular:
132.16
Beilstein:
1751656
Número CE:
Número MDL:
Código UNSPSC:
12352100
ID de la sustancia en PubChem:
NACRES:
NA.21
bp:
145-146 °C (lit.)
145-146 °C
145-146 °C
En este momento no podemos mostrarle ni los precios ni la disponibilidad
Productos recomendados
grado
reagent
Nivel de calidad
presión de vapor
3.7 mmHg ( 20 °C)
Línea del producto
ReagentPlus®
Ensayo
≥99.5%
temp. de autoignición
669 °F
lim. expl.
13.1 %
dilution
(for general lab use)
índice de refracción
n20/D 1.402 (lit.)
bp
145-146 °C (lit.)
145-146 °C
solubilidad
water: soluble 198 g/L at 20 °C
densidad
0.970 g/mL at 25 °C (lit.)
grupo funcional
ester
ether
cadena SMILES
COCC(C)OC(C)=O
InChI
1S/C6H12O3/c1-5(4-8-3)9-6(2)7/h5H,4H2,1-3H3
Clave InChI
LLHKCFNBLRBOGN-UHFFFAOYSA-N
Información sobre el gen
human ... AR(367) , IMPDH2(3615) , NR3C1(2908) , PGR(5241)
¿Está buscando productos similares? Visita Guía de comparación de productos
Descripción general
Propylene glycol monomethyl ether acetate (PGMEA) is a photoresist solvent.[1] Its degradation by microorganisms in different soil types has been investigated.[2] An oral reference dose (RfD) value of PGMEA has been obtained from inhalation studies.[3] The solubility of (5-alkylsulfonyloxyimino-5H-thiophen-2-ylidene)-2-methylphenyl-acetonitriles in PGMEA has been analyzed.[4]
Aplicación
Propylene glycol monomethyl ether acetate has been used in the development of fluidic channels to be incorporated in a poly(dimethylsiloxane) (PDMS)-based microfluidic device.[5]
Información legal
Product of Dow Chemical
ReagentPlus is a registered trademark of Merck KGaA, Darmstadt, Germany
DOWANOL is a registered trademark of The Dow Chemical Company or an affiliated company of Dow
Palabra de señalización
Warning
Frases de peligro
Consejos de prudencia
Clasificaciones de peligro
Flam. Liq. 3
Código de clase de almacenamiento
3 - Flammable liquids
Clase de riesgo para el agua (WGK)
WGK 2
Punto de inflamabilidad (°F)
113.9 °F - closed cup
Punto de inflamabilidad (°C)
45.5 °C - closed cup
Elija entre una de las versiones más recientes:
¿Ya tiene este producto?
Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.
Los clientes también vieron
Novel photoacid generators for chemically amplified resists with g-line, i-line, and DUV exposure.
Asakura T, et al.
SPIE Proc., 4345 (2001)
Comparison of photoresist shelf life in PGMEA and CA solvent systems.
Nelson WC.
SPIE Proc., 2195 (1994)
Christian Bleilevens et al.
Scientific reports, 8(1), 8031-8031 (2018-05-26)
Extracorporeal lung assist technology is one of the last options in critical care medicine to treat patients suffering from severe oxygenation and decarboxylation disorders. Platelet activation along with the consequent thrombus formation is a potentially life-threatening complication of this technique.
Yug C Saraswat et al.
Journal of colloid and interface science, 564, 43-51 (2020-01-07)
Our ability to dictate the colloid geometry is intimately related to self-assembly. The synthesis of anisotropic colloidal particles is currently dominated by wet chemistry and lithographic techniques. The wet chemical synthesis offers limited particle geometries at bulk quantities. Lithographic techniques
Nasim Annabi et al.
Lab on a chip, 13(18), 3569-3577 (2013-06-04)
The research areas of tissue engineering and drug development have displayed increased interest in organ-on-a-chip studies, in which physiologically or pathologically relevant tissues can be engineered to test pharmaceutical candidates. Microfluidic technologies enable the control of the cellular microenvironment for
-
What is the makeup for this fluid? Does it have any harmful contents for humans?
1 answer-
Helpful?
-
-
How is shipping temperature determined? And how is it related to the product storage temperature?
1 answer-
Products may be shipped at a different temperature than the recommended long-term storage temperature. If the product quality is sensitive to short-term exposure to conditions other than the recommended long-term storage, it will be shipped on wet or dry-ice. If the product quality is NOT affected by short-term exposure to conditions other than the recommended long-term storage, it will be shipped at ambient temperature. As shipping routes are configured for minimum transit times, shipping at ambient temperature helps control shipping costs for our customers. For more information, please refer to the Storage and Transport Conditions document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/316/622/storage-transport-conditions-mk.pdf
Helpful?
-
-
How can I determine the shelf life / expiration / retest date of this product?
1 answer-
If this product has an expiration or retest date, it will be shown on the Certificate of Analysis (COA, CofA). If there is no retest or expiration date listed on the product's COA, we do not have suitable stability data to determine a shelf life. For these products, the only date on the COA will be the release date; a retest, expiration, or use-by-date will not be displayed.
For all products, we recommend handling per defined conditions as printed in our product literature and website product descriptions. We recommend that products should be routinely inspected by customers to ensure they perform as expected.
For products without retest or expiration dates, our standard warranty of 1 year from the date of shipment is applicable.
For more information, please refer to the Product Dating Information document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/449/386/product-dating-information-mk.pdfHelpful?
-
Active Filters
Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.
Póngase en contacto con el Servicio técnico
