11756281001
Roche
Nitric Oxide, Colorimetric Assay
Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización
About This Item
UNSPSC Code:
12352200
Productos recomendados
usage
sufficient for 96 multiwell tests
manufacturer/tradename
Roche
shipped in
wet ice
storage temp.
2-8°C
General description
Detection limit: 0.28 μM for nitrate, and 0.32 μM for nitrite.
Linearity: The method is linear in the range from 0.28 μM to 80.0 μM nitrate and from 0.32 M to 108.0 μM nitrite.
Specificity
Under the given conditions, nitrate reductase reacts specifically with nitrate ions.
Application
Determination of nitric oxide (NO) via nitrite in biological fluids in a microplate. Nitrate present in the sample is reduced to nitrite by nitrate reductase.
Packaging
1 test combination containing 7 components.
Preparation Note
Working concentration: The standard material recommended is Na nitrate, but the concentrations given for the calibration curve are for the nitrate ion only. The reason for this is that it is not known which cation is present in a sample. To emphasize this, instructions indicate the conversion factor from NaNO2 to nitrite (NO2-).
Working solution: Preparation of the solutions
Storage conditions (working solution): Reaction mixture 2: Prepare immediately before use and bring to 15 to 25 °C before use
Color reagent I: sulfanilamide, stabilized, 8 ml
Potassium nitrate standard, aliquots: stable at -15 to -25 °C for 3 month
Working solution: Preparation of the solutions
- Use the contents of bottle 1 undiluted at 15 to 25 °C before use.
- Place three tablets from bottle 2 in a beaker and dissolve in 1 ml of buffer from bottle 1; use the tweezers provided to remove the tablets from the bottle. The resulting solution is reaction mixture 2 and is sufficient for about 20 incubation assays.
- Dissolve the contents of one bottle 3 in 0.6 ml of double-dist. water to give solution 3.
- Use the contents of bottle 4 undiluted.
- Use the contents of bottle 5 undiluted.
- Dilute the contents
Storage conditions (working solution): Reaction mixture 2: Prepare immediately before use and bring to 15 to 25 °C before use
Color reagent I: sulfanilamide, stabilized, 8 ml
Potassium nitrate standard, aliquots: stable at -15 to -25 °C for 3 month
Other Notes
For life science research only. Not for use in diagnostic procedures.
Solo componentes del kit
Referencia del producto
Descripción
- Potassium Phosphate Buffer, pH 7.5
- Coenzyme
- Nitrate Reductase (2)
- Color Reagent I, consisting of sulfanilamide
- Color Reagent II, consisting of N-(1-naphthyl)ethylendiamine dihydrochloride
- Potassium nitrate standard 80.0 mM
- Microtiter plate, a frame with 12 modules 8 wells each
signalword
Danger
hcodes
Hazard Classifications
Eye Dam. 1 - Met. Corr. 1 - Resp. Sens. 1 - Skin Sens. 1
Storage Class
8B - Non-combustible corrosive hazardous materials
wgk_germany
WGK 2
flash_point_f
does not flash
flash_point_c
does not flash
Elija entre una de las versiones más recientes:
¿Ya tiene este producto?
Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.
Los clientes también vieron
Soha M Abd El Dayem et al.
Open access Macedonian journal of medical sciences, 5(7), 934-939 (2018-01-25)
To evaluate the relationship of apelin and nitric oxide (NO) to endothelial dysfunction in type 1 diabetics. Sixty two type 1 diabetics and 30 healthy age and sex matched controls were included. Blood samples for apelin, NO, glycosylated hemoglobin (HbA1c)
Simon Burggraaf et al.
PloS one, 6(1), e14561-e14561 (2011-02-02)
The mechanisms of disease severity caused by H5N1 influenza virus infection remain somewhat unclear. Studies have indicated that a high viral load and an associated hyper inflammatory immune response are influential during the onset of infection. This dysregulated inflammatory response
Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.
Póngase en contacto con el Servicio técnico
