Saltar al contenido
Merck
Todas las fotos(1)

Documentos

902497

Sigma-Aldrich

Polymer dielectric grey for screen printing

greener alternative

Sinónimos:

D2070423P5, Dielectric ink, Dielectric paste

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización
Todas las fotos(1)

About This Item

UNSPSC Code:
12162002
NACRES:
NA.23

description

Coverage: 305 cm2 per g (using a 230 mesh stainless steel screen with 13 micron emulsion)
Solvent Resistance: THF − Attack
Solvent Resistance: Acetone − Attack
Solvent Resistance: DMAC − Attack
Solvent Resistance: DMF− Attack
Solvent Resistance: MEK − Full attack

form

paste

composition

Solid content, 50-55% (at 150 °C)

greener alternative product characteristics

Design for Energy Efficiency
Learn more about the Principles of Green Chemistry.

sustainability

Greener Alternative Product

viscosity

12.0-16.0 Pa.s (Haake RS1 C20/2° TiL at 230 sec-1 at 25 °C)

greener alternative category

, Enabling

General description

This product is grey colored screen printable polymer dielectric, suitable for defining electrode areas and forms a protective layer over the electrode tracking during immersion of the electrode.
We are committed to bringing you Greener Alternative Products, which adhere to one or more of The 12 Principles of Greener Chemistry. This product belongs to Enabling category of greener alternatives thus aligns with "Design for energy efficency". Click here for more information.

Application

Polymer dielectric grey for screen printing can be used for a variety of applications such as ink in the design of MRI receiving coils, organic light emitting diodes (OLEDs) and organic thin film transistors (OTFTs).

Features and Benefits

The formulation is designed for maximum flexibility.

Preparation Note

Screen Printing Equipment: semi-automatic, automatic.
Ink Screen Life: >3 hours
Screen Types: stainless steel, polyester mesh 156-325 tpi
  • Typical Drying Conditions: Dry at 80 °C for 30 minutes, or 130 °C for 10-15 minutes in a box oven
  • Suitable for Jet drying, infra-red and drying in high speed
  • reel-to-reel
Clean Up Solvent: ethoxy propanol or sericol
Substrate: polyester, PVC, polycarbonate, ceramic or alumina

Legal Information

Product of Gwent Electronic Materials Ltd (GEM), part of Sun Chemical Corporation

pictograms

Exclamation mark
GHS07

signalword

Warning

hcodes

H319

Hazard Classifications

Eye Irrit. 2

Storage Class

10 - Combustible liquids

wgk_germany

WGK 3

flash_point_f

191.3 °F

flash_point_c

88.5 °C

Certificados de análisis (COA)

Busque Certificados de análisis (COA) introduciendo el número de lote del producto. Los números de lote se encuentran en la etiqueta del producto después de las palabras «Lot» o «Batch»

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

Scientific importance, properties and growing applications of poly (3, 4-ethylenedioxythiophene)
Kirchmeyer S and Reuter K
Journal of Materials Chemistry, 15(21), 2077-2088 (2005)
Screen-printed flexible MRI receive coils
Corea JR, et al.
Nature Communications, 7, 10839-10839 (2016)
A printed OTFT-backplane for AMOLED display
Ryu GS, et al.
Organic Electronics, 14(4), 1218-1224 (2013)

Artículos

Advancements in Organic Electronics

Professors Tokito and Takeda share design principles and optimization protocols for organic electronic devices, focusing on flexibility and low cost.

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico