Saltar al contenido
Merck

437220

Sigma-Aldrich

Poly(ethylene-co-vinyl acetate)

vinyl acetate 25 wt. %, melt index 19 g/10 min (190°C/2.16 kg), contains 200-900 ppm BHT as inhibitor

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización


About This Item

Fórmula lineal:
(CH2CH2)m[CH2CH(OCOCH3)]n
Número de CAS:
Número MDL:
Código UNSPSC:
12162002
ID de la sustancia en PubChem:
NACRES:
NA.23

Formulario

beads

temp. de autoignición

500 °F

índice de fusión

19 g/10 min (190°C/2.16 kg)

contiene

200-900 ppm BHT as inhibitor

composición

vinyl acetate, 25 wt. %

dureza

28 (Shore D, ASTM D 2240)

mp

75 °C

temperatura de transición

softening point 46 °C (Vicat, ASTM D 1525)

densidad

0.948 g/mL at 25 °C

cadena SMILES

C=C.CC(=O)OC=C

InChI

1S/C4H6O2.C2H4/c1-2-3-4(5)6;1-2/h2H,1,3H2,(H,5,6);1-2H2

Clave InChI

DQXBYHZEEUGOBF-UHFFFAOYSA-N

¿Está buscando productos similares? Visita Guía de comparación de productos

Aplicación

Flexible tubing, color concentrates, gaskets and molded parts for autos, plastic lenses and pumps.

Características y beneficios

Thermoplastic, resilient, tough and resistant to ozone and environmental stress cracking. Inherently flexible, requiring no plasticizers.

Código de clase de almacenamiento

11 - Combustible Solids

Clase de riesgo para el agua (WGK)

nwg

Punto de inflamabilidad (°F)

Not applicable

Punto de inflamabilidad (°C)

Not applicable


Elija entre una de las versiones más recientes:

Certificados de análisis (COA)

Lot/Batch Number

¿No ve la versión correcta?

Si necesita una versión concreta, puede buscar un certificado específico por el número de lote.

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

Los clientes también vieron

The synthetic ethylene-vinyl acetate bench model.
Rafael Denadai et al.
Dermatologic surgery : official publication for American Society for Dermatologic Surgery [et al.], 38(2), 288-289 (2012-02-09)
Mahmoud Borhani zarandi et al.
Applied radiation and isotopes : including data, instrumentation and methods for use in agriculture, industry and medicine, 70(1), 1-5 (2011-10-18)
In this paper a series of low-density polyethylene (LDPE) blends with different percentages (10%, 20%, and 30%) of EVA and sets of low-density polyethylene sheets were prepared. This set consists of four subsets, which were made under different cooling methods:
Eva C González Díaz et al.
Tissue engineering. Part A, 24(13-14), 1148-1156 (2018-01-26)
Synthetic biomaterials that create a dynamic calcium (Ca2+)-, phosphate (PO43-) ion-, and calcium phosphate (CaP)-rich microenvironment, similar to that found in native bone tissue, have been shown to promote osteogenic commitment of stem cells in vitro and in vivo. The
Lili Wang et al.
PloS one, 7(6), e37781-e37781 (2012-06-14)
The study on the rare earth (RE)-doped layered double hydroxides (LDHs) has received considerable attention due to their potential applications in catalysts. However, the use of RE-doped LDHs as polymer halogen-free flame retardants was seldom investigated. Furthermore, the effect of
Shijun Sheng et al.
Journal of separation science, 36(4), 721-728 (2013-01-29)
In this report, a graphene/poly(ethylene-co-vinyl acetate) composite electrode was fabricated by melt compounding for the amperometric detection of capillary electrophoresis. The composite electrode was fabricated by packing a mixture of graphene and melted poly(ethylene-co-vinyl acetate) in a piece of fused

Questions

Reviews

No rating value

Active Filters

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico