Saltar al contenido
Merck
Todas las fotos(1)

Documentos

181498

Sigma-Aldrich

Polyisobutylene

average Mw ~4,200,000, average Mn ~3,100,000 by GPC/MALLS, average Mv ~4,700,000

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización
Todas las fotos(1)

About This Item

Fórmula lineal:
[CH2C(CH3)2]n
Número de CAS:
9003-27-4
MDL number:
MFCD00084436
UNSPSC Code:
12162002
PubChem Substance ID:
24850938

form

slab/chunk

mol wt

average Mn ~3,100,000 by GPC/MALLS
average Mv ~4,700,000
average Mw ~4,200,000

contains

500 ppm BHT as stabilizer

refractive index

n20/D 1.51

density

0.92 g/mL at 25 °C (lit.)

SMILES string

CC(C)=C

InChI

1S/C4H8/c1-4(2)3/h1H2,2-3H3

InChI key

VQTUBCCKSQIDNK-UHFFFAOYSA-N

¿Está buscando productos similares? Visita Guía de comparación de productos

General description

Polyisobutylene (PIB) is an elastomer and plasticizer.It exhibits good gas permeability, thermal, oxidative and chemical stability. Films of PIB can be synthesized by RF sputtering, whereas branched PIB can be synthesized from 4-(1-hydroxy-1-methylethyl)styrene -co-styrene (HMESt-co-St) as inimer.

Application

PIB may be used to prepare polymers blends with isotactic polypropylene (iPP).

Storage Class

10 - Combustible liquids

wgk_germany

WGK 3

flash_point_f

Not applicable

flash_point_c

Not applicable

ppe

Eyeshields, Gloves

Certificados de análisis (COA)

Busque Certificados de análisis (COA) introduciendo el número de lote del producto. Los números de lote se encuentran en la etiqueta del producto después de las palabras «Lot» o «Batch»

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

Dynamic rheological properties of polyisobutylene
Dunlop AN and Williams HL
Journal of Applied Polymer Science, 20, 193-206 (1976)
Morphology, crystallization and melting behaviour of films of isotactic polypropylene blended with ethylene-propylene copolymers and polyisobutylene,
Martuscelli E, et al.
Polymer, 23(2), 229-237 (1982)
David Cozzens et al.
Langmuir : the ACS journal of surfaces and colloids, 27(23), 14160-14168 (2011-10-26)
The surface properties and biocompatibility of a class of thermoplastic polyurethanes (TPUs) with applications in blood-contacting medical devices have been studied. Thin films of commercial TPUs and novel polyisobutylene (PIB)-poly(tetramethylene oxide) (PTMO) TPUs were characterized by contact angle measurements, X-ray
David Cozzens et al.
Journal of biomedical materials research. Part A, 95(3), 774-782 (2010-08-21)
Long term in vitro biostability of thermoplastic polyurethanes (TPUs) containing mixed polyisobutylene (PIB)/poly(tetramethylene oxide) (PTMO) soft segment was studied under accelerated conditions in 20% H(2)O(2) solution containing 0.1M CoCl(2) at 50 °C to predict resistance to metal ion oxidative degradation
Goy Teck Lim et al.
Biomacromolecules, 12(5), 1795-1799 (2011-04-01)
This paper is the first report of electrospinning neat polyisobutylene-based thermoplastic elastomers. Two generations of these materials are investigated: a linear poly(styrene-b-isobutylene-b-styrene) (L_SIBS) triblock copolymer and a dendritic poly(isobutylene-b-p-methylstyrene) (D_IB-MS), also a candidate for biomedical applications. Cross-polarized optical microscopy shows
Ver todos los artículos relacionados

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico