Skip to Content
Merck
  • Platinum rechallenge in patients with advanced NSCLC: a pooled analysis.

Platinum rechallenge in patients with advanced NSCLC: a pooled analysis.

Lung cancer (Amsterdam, Netherlands) (2013-07-31)
Fausto Petrelli, Andrea Coinu, Mary Cabiddu, Mara Ghilardi, Mara Ardine, Sandro Barni
ABSTRACT

The sole agents pemetrexed (PEM), docetaxel and anti-EGFR agents are approved second-line therapies for non-small cell lung cancer (NSCLC) after failure with cisplatin-based doublets. The potential usefulness of platinum-based doublets as rechallenge for second-line chemotherapy has not yet been established. Studies that enrolled NSCLC platinum pre-treated patients were identified using electronic databases (MEDLINE and EMBASE). Pemetrexed and taxanes (TAXs)-based platinum combinations were considered. A systematic review was conducted using Comprehensive Meta-Analysis (version 2.2.064) software to calculate the event rate of response and 95% confidence interval. Median weighted progression-free survival (PFS) and overall survival (OS) time for PEM and TAXs-based doublets were compared by two-sided Student's t test. We tested for significant heterogeneity by Cochran's chi-square test and I(2) index. Eleven studies published between 1999 and 2012 were included in this analysis with a total of 607 patients enrolled; 468 were treated with PEM-doublets and 139 with TAXs-doublets. The overall response rate was 27.5% with a higher response rate of 37.8% (range, 29.7-46.7%) for TAXs-based treatment vs. 22% (range, 13.4-34.1%) for PEM-based combinations; (p < 0.0001). Median PFS and OS were 3.9 and 8.7 months with weighted PFS of 3.9 vs. 5.3 months (p < 0.0001) and similar OS for PEM vs. TAXs-based doublets. With the limitations of small and not randomised trials included, this pooled analysis shows that NSCLC patients who relapsed after a first-line platinum-based chemotherapy obtain a tumour response of 27% from a platinum rechallenge containing PEM or TAXs. Response rate and median PFS appear better with TAXs-than with PEM-doublets.

MATERIALS
Product Number
Brand
Product Description

Platinum, foil, not light tested, 50x50mm, thickness 0.004mm, as rolled, 99.95%
Platinum, tube, 100mm, outside diameter 3.0mm, inside diameter 2.8mm, wall thickness 0.1mm, as drawn, 99.95%
Platinum, insulated wire, 2m, conductor diameter 0.018mm, insulation thickness 0.002mm, polyester insulation, 99.99%
Platinum, rod, 2mm, diameter 2.0mm, 99.95%
Platinum, tube, 100mm, outside diameter 1.0mm, inside diameter 0.8mm, wall thickness 0.1mm, as drawn, 99.95%
Platinum, rod, 10mm, diameter 4.0mm, 99.95%
Platinum, insulated wire, 0.5m, conductor diameter 0.05mm, insulation thickness 0.0075mm, polyester insulation, 99.99%
Platinum, insulated wire, 5m, conductor diameter 0.05mm, insulation thickness 0.009mm, PTFE (polytetrafluoroethylene) insulation, 99.99%
Platinum, tube, 200mm, outside diameter 0.95mm, inside diameter 0.60mm, wall thickness 0.175mm, as drawn, 99.95%
Platinum, foil, not light tested, 50x50mm, thickness 0.01mm, as rolled, 99.95%
Platinum, insulated wire, 1m, conductor diameter 0.05mm, insulation thickness 0.009mm, PTFE (polytetrafluoroethylene) insulation, 99.99%
Platinum, foil, 30x30mm, thickness 0.2mm, as rolled, 99.95%
Platinum, foil, 15x15mm, thickness 0.2mm, as rolled, 99.95%
Platinum, rod, 10mm, diameter 5.0mm, 99.95%
Platinum, tube, 200mm, outside diameter 1.0mm, inside diameter 0.8mm, wall thickness 0.1mm, as drawn, 99.95%
Platinum, tube, 100mm, outside diameter 0.6mm, inside diameter 0.5mm, wall thickness 0.05mm, as drawn, 99.95%
Platinum, insulated wire, 2m, conductor diameter 0.025mm, insulation thickness 0.001mm, PTFE (polytetrafluoroethylene) insulation, 99.999%
Platinum, tube, 1000mm, outside diameter 0.6mm, inside diameter 0.5mm, wall thickness 0.05mm, as drawn, 99.95%
Platinum, insulated wire, 5m, conductor diameter 0.025mm, insulation thickness 0.005mm, polyester insulation, 99.99%
Platinum, rod, 200mm, diameter 1.0mm, 99.95%
Platinum, foil, 25x25mm, thickness 0.25mm, as rolled, 99.99+%
Platinum, tube, 50mm, outside diameter 1.0mm, inside diameter 0.8mm, wall thickness 0.1mm, as drawn, 99.95%
Platinum, foil, 25x25mm, thickness 0.125mm, as rolled, 99.99+%
Platinum, wire reel, 0.05m, diameter 1.0mm, as drawn, 99.99+%
Platinum, foil, not light tested, 50x50mm, thickness 0.0025mm, as rolled, 99.95%
Platinum, microfoil, disks, 25mm, thinness 0.1μm, specific density 120μg/cm2, permanent mylar 3.5μm support, 99.99%
Platinum, insulated wire, 0.2m, conductor diameter 0.125mm, insulation thickness 0.014mm, polyester insulation, 99.99%
Platinum, rod, 25mm, diameter 1.0mm, 99.95%
Platinum, tube, 50mm, outside diameter 2.0mm, inside diameter 1.6mm, wall thickness 0.2mm, as drawn, 99.95%
Platinum, wire reel, 0.05m, diameter 0.20mm, annealed, may be used as one component of a thermocouple, 99.99%