Saltar al contenido
MilliporeSigma
  • Magnetic graphene as modified quick, easy, cheap, effective, rugged and safe adsorbent for the determination of organochlorine pesticide residues in tobacco.

Magnetic graphene as modified quick, easy, cheap, effective, rugged and safe adsorbent for the determination of organochlorine pesticide residues in tobacco.

Journal of chromatography. A (2015-06-21)
Yan-Bo Luo, Xue Li, Xing-Yi Jiang, Bao-Dong Cai, Feng-Peng Zhu, Hong-Fei Zhang, Zai-Gen Chen, Yong-Qiang Pang, Yu-Qi Feng
RESUMEN

In this study, magnetic graphene was used as modified quick, easy, cheap, effective, rugged and safe (QuEChERS) adsorbent for the determination of organochlorine pesticide (OCPs) residues in tobacco. To achieve the optimum conditions of modified QuEChERS procedure toward target analytes, several parameters affecting the clean-up efficiency including the amount of the adsorbent and clean-up time were investigated. Under the optimized conditions, a method for the determination of 26 OCPs residues in tobacco was established by coupling the modified QuEChERS procedure to on-line gel permeation chromatography-gas chromatography-tandem mass spectrometry (on-line GPC-GC-MS(2)). The limits of detection of proposed method for 26 OCPs residues ranged from 0.01275 to 3.150ng/g. And good linearities of the proposed method were obtained with coefficients of determination (R(2)) greater than 0.9985 for all target analytes. Good reproducibility of method was obtained as intra- and inter-day precisions, the relative standard deviations were less than 11.1 and 15.0%, respectively. The apparent recoveries were in the range of 64-126% at different concentrations for real samples. Compared with the reported methods for the determination of OCPs residues in tobacco, the proposed method has the advantages of simple to operate, low cost and high clean-up ability. Finally, the method was successfully applied to the analysis of OCPs residues in real samples.

MATERIALES
Referencia del producto
Marca
Descripción del producto

Sigma-Aldrich
Hidróxido de sodio solution, BioUltra, for molecular biology, 10 M in H2O
Sigma-Aldrich
Ácido sulfúrico, 99.999%
Sigma-Aldrich
Hidróxido de sodio solution, 1.0 N, BioReagent, suitable for cell culture
Sigma-Aldrich
Hidróxido de sodio solution, 0.1 M
Sigma-Aldrich
Sulfato de magnesio, BioReagent, suitable for cell culture, suitable for insect cell culture
Sigma-Aldrich
Ácido sulfúrico, SAJ first grade, ≥95.0%
Sigma-Aldrich
Hidróxido de sodio solution, 1 M
Sigma-Aldrich
Ácido sulfúrico, JIS special grade, ≥95.0%
Sigma-Aldrich
Triphenyl phosphate, ≥99%
Sigma-Aldrich
Magnesium sulfate solution, for molecular biology, 1.00 M±0.04 M
Sigma-Aldrich
Persulfato de potasio, 99.99% trace metals basis
Sigma-Aldrich
Hidróxido de sodio, BioUltra, for luminescence, ≥98.0% (T), pellets
Sigma-Aldrich
Alcohol etílico puro, 190 proof, ACS spectrophotometric grade, 95.0%
Sigma-Aldrich
Acetonitrilo, anhydrous, 99.8%
Sigma-Aldrich
Tolueno, anhydrous, 99.8%
Sigma-Aldrich
Hidróxido de sodio, JIS special grade, ≥96.0%
Sigma-Aldrich
Hidróxido de sodio, SAJ first grade, ≥95.0%
Sigma-Aldrich
Alcohol etílico puro, 200 proof, anhydrous, ≥99.5%
Sigma-Aldrich
Magnesium sulfate solution, BioUltra, for molecular biology
Sigma-Aldrich
Hidróxido de sodio, ultra dry, powder or crystals, 99.99% trace metals basis
Sigma-Aldrich
Ácido cítrico monohydrate, ACS reagent, ≥99.0%
Sigma-Aldrich
Acetonitrilo, electronic grade, 99.999% trace metals basis
Supelco
Ethanol solution, 10 % (v/v) in H2O, analytical standard
Sigma-Aldrich
Sulfato de magnesio, ≥99.99% trace metals basis
Sigma-Aldrich
Phosphorus pentoxide, ReagentPlus®, 99%
Sigma-Aldrich
Hidróxido de sodio solution, 6 M
Sigma-Aldrich
Sulfuric acid solution, 0.5 M
Supelco
Acetonitrilo, HPLC grade, ≥99.93%
Sigma-Aldrich
Tolueno, SAJ first grade, ≥99.0%
Sigma-Aldrich
Sulfuric acid solution, 0.05 M