Saltar al contenido
MilliporeSigma
  • A Highly Specific, Fully Validated Urinary Ethyl Glucuronide Analysis Using Solid Phase Extraction-Liquid Chromatography/Electrospray Ionization-Tandem Mass Spectrometry.

A Highly Specific, Fully Validated Urinary Ethyl Glucuronide Analysis Using Solid Phase Extraction-Liquid Chromatography/Electrospray Ionization-Tandem Mass Spectrometry.

Journal of AOAC International (2015-06-19)
Munevver Acikkol, Ali Acar Ozdemir, Beril Anilanmert, Hasan Mirsal
RESUMEN

A highly specific and selective analytical method using LC/MS/MS for the quantitative determination of ethyl glucuronide (EtG) in urine was developed and fully validated. Since the determination of EtG in urine may be possible days after the elimination of alcohol, it is an indication of alcohol use in alcohol treatment programs and antemortem and postmortem toxicological investigations. Propyl glucuronide (PrG), which increased the selectivity of the method, was used as an internal standard. The method was validated in terms of selectivity, linearity, LOD, LOQ, intraday and interday precision, and recovery. The analyte and PrG in the SPE cleaned up extract were separated on a 150 mm C18 column in 3.3 min with high resolution. The rest of the peaks from the matrix were eluted in 9.0 min. The LOD was 90.8 ng/mL and the LOQ was calculated using the EURACHEM method as 185.0 ng/mL. The intraday and the intermediate precision of the method was calculated using analysis of variance and confirmed with calculation of HorRat values, which were found within acceptable limits. The method provided a reliable solution for monitoring patients under alcohol addiction treatment and was successfully applied to real samples.

MATERIALES
Referencia del producto
Marca
Descripción del producto

Sigma-Aldrich
Ácido pícrico, moistened with water, ≥98%
Sigma-Aldrich
Picric acid solution, 1.3% in H2O (saturated)
Sigma-Aldrich
Metanol, JIS special grade, ≥99.8%
Sigma-Aldrich
Ammonia, anhydrous, ≥99.98%
Sigma-Aldrich
Ammonia solution, 4 M in methanol
Sigma-Aldrich
Ammonia solution, 0.4 M in THF
Sigma-Aldrich
Sodium fluoride, 99.99% trace metals basis
Sigma-Aldrich
Metanol, SAJ first grade, ≥99.5%
Sigma-Aldrich
Metanol, anhydrous, 99.8%
Sigma-Aldrich
Hexano, JIS special grade, ≥96.0%
Sigma-Aldrich
Hexano, anhydrous, 95%
Sigma-Aldrich
terc-Butanol, anhydrous, ≥99.5%
Sigma-Aldrich
Sodium Fluoride Solution
Sigma-Aldrich
Sodium fluoride, BioReagent, suitable for insect cell culture, ≥99%
Sigma-Aldrich
Metanol, SAJ special grade
Sigma-Aldrich
Metanol, suitable for HPLC
Sigma-Aldrich
Hexano, SAJ first grade, ≥95.0%
Sigma-Aldrich
Metanol, suitable for HPLC, gradient grade, 99.93%
Sigma-Aldrich
Sodium fluoride, BioXtra, ≥99%
Sigma-Aldrich
Metanol, NMR reference standard
Sigma-Aldrich
Hexano, suitable for HPLC
Sigma-Aldrich
Picric acid solution
Sigma-Aldrich
Methanol solution, NMR reference standard, 4% in methanol-d4 (99.8 atom % D), NMR tube size 3 mm × 8 in.
Sigma-Aldrich
Hexano, JIS 300, ≥96.0%, for residue analysis
Sigma-Aldrich
Ammonia-14N, 99.99 atom % 14N
Sigma-Aldrich
Hexano, for residue analysis, JIS 5000
Sigma-Aldrich
Methanol-12C, 99.95 atom % 12C
Sigma-Aldrich
Hexano, JIS 1000, ≥96.0%, for residue analysis
Sigma-Aldrich
Metanol, JIS 300, ≥99.8%, for residue analysis
Supelco
Methanol solution, contains 0.10 % (v/v) formic acid, UHPLC, suitable for mass spectrometry (MS), ≥99.5%