Saltar al contenido
MilliporeSigma

A dextran-bonded stationary phase for saccharide separation.

Journal of chromatography. A (2014-05-06)
Qianying Sheng, Xindai Su, Xiuling Li, Yanxiong Ke, Xinmiao Liang
RESUMEN

A-saccharide-based stationary phase for hydrophilic interaction liquid chromatography (HILIC) is presented. The method uses carbonyl di-imidazole (CDI) as a cross-linker for dextran in aqueous solution. Different from the traditional immobilized saccharide stationary phase, this method was using a simple way to bond the high molecular of polysaccharide immobilized on the silica gel. The new method avoided the time-consuming process but had a very considerable loading result. With silica-based surface bonded, it will be possible to develop well-defined surface modifications that promote the hydrophilic with dextran and high mechanical strength with silica. For all tested compounds, including polar compounds and carbohydrates, this dextran-bonded stationary phase performed well in terms of separation efficiency and column stability, and the retention mechanism matched that of typical HILIC retention. Moreover, good selectivity was achieved in the separation of oligosaccharides and glycopeptides.

MATERIALES
Referencia del producto
Marca
Descripción del producto

Sigma-Aldrich
Acetonitrilo, suitable for HPLC, gradient grade, ≥99.9%
Sigma-Aldrich
Acetonitrilo, HPLC Plus, ≥99.9%
Sigma-Aldrich
Ácido fórmico, reagent grade, ≥95%
Sigma-Aldrich
Ácido fórmico, ACS reagent, ≥96%
Sigma-Aldrich
Ammonium acetate, ACS reagent, ≥97%
Sigma-Aldrich
Ácido fórmico, puriss. p.a., ACS reagent, reag. Ph. Eur., ≥98%
Sigma-Aldrich
Ammonium bicarbonate, ReagentPlus®, ≥99.0%
Sigma-Aldrich
Acetonitrilo, ACS reagent, ≥99.5%
Sigma-Aldrich
Formato de amonio, reagent grade, 97%
Sigma-Aldrich
Ammonium acetate, ≥99.99% trace metals basis
Sigma-Aldrich
Acetonitrilo, suitable for HPLC, gradient grade, ≥99.9%
Sigma-Aldrich
Formato de amonio, ≥99.995% trace metals basis
Sigma-Aldrich
Ácido fórmico, puriss., meets analytical specifications of DAC, FCC, 98.0-100%
Sigma-Aldrich
Ácido fórmico, ACS reagent, ≥88%
Sigma-Aldrich
Acetonitrilo, anhydrous, 99.8%
Sigma-Aldrich
Ammonium acetate, for molecular biology, ≥98%
Sigma-Aldrich
Acetonitrilo, suitable for HPLC-GC, ≥99.8% (GC)
Sigma-Aldrich
Ammonium acetate solution, for molecular biology, 7.5 M
Sigma-Aldrich
Ammonium formate solution, BioUltra, 10 M in H2O
Sigma-Aldrich
Acetonitrilo, biotech. grade, ≥99.93%
Sigma-Aldrich
Ammonium acetate, 99.999% trace metals basis
Supelco
Formato de amonio, eluent additive for LC-MS, LiChropur, ≥99.0%
Supelco
Ammonium acetate, LiChropur, eluent additive for LC-MS
Sigma-Aldrich
Ácido fórmico, ≥95%, FCC, FG
Supelco
Ammonium formate solution, 10 mM in H2O, suitable for HPLC
Sigma-Aldrich
Acetonitrilo, suitable for DNA synthesis, ≥99.9% (GC)
Sigma-Aldrich
Acetonitrilo, ReagentPlus®, 99%
Sigma-Aldrich
Acetonitrilo, electronic grade, 99.999% trace metals basis
Sigma-Aldrich
Ammonium bicarbonate, BioUltra, ≥99.5% (T)
Supelco
Acetonitrilo, HPLC grade, ≥99.93%