Saltar al contenido
MilliporeSigma

Application of the Fenton process in the elimination of helminth eggs.

Journal of water and health (2014-12-05)
Sandra Isabel Escobar-Megchún, Hugo Alejandro Nájera-Aguilar, Magaly González-Hilerio, Javier Gutiérrez-Jiménez, Rubén Fernando Gutiérrez-Hernández, María Neftalí Rojas-Valencia
RESUMEN

This study relates to a method for evaluating the degradation efficiency of Ascaris lumbricoides eggs through a Fenton reaction, using hydrogen peroxide (H2O2) at 100, 250, and 500 mg/L, ferrous sulfate (FeSO4) at 458 mg/L Fe(2+) and pH values of 3, 4.5, and 6. The experiments were conducted according to a 3(2) experimental design, with 1:1, 3:1, and 5:1 (H2O2/Fe(2+)) molar ratios. The oxidation and flocculation stages were performed at 130 rpm during 2 hours and at 25-30 rpm during 20 min, respectively. As a result of the Fenton reaction, an average of 91.2% Ascaris lumbricoides egg degradation was achieved at pH 6 using a 500 mg/L dose of H2O2 and a 3:1 (H2O2/Fe(2+)) molar ratio. Thus, this process is an alternative for eliminating parasites that are resistant to conventional disinfection processes and significantly reduces the human health hazard they represent.

MATERIALES
Referencia del producto
Marca
Descripción del producto

Sigma-Aldrich
Peróxido de hidrógeno solution, contains inhibitor, 30 wt. % in H2O, ACS reagent
Sigma-Aldrich
Peróxido de hidrógeno solution, 30 % (w/w) in H2O, contains stabilizer
Sigma-Aldrich
Iron(II) sulfate heptahydrate, ReagentPlus®, ≥99%
Sigma-Aldrich
Iron(II) sulfate heptahydrate, ACS reagent, ≥99.0%
Sigma-Aldrich
Peróxido de hidrógeno solution, 50 wt. % in H2O, stabilized
Sigma-Aldrich
Iron, ≥99%, reduced, powder (fine)
Sigma-Aldrich
Peróxido de hidrógeno solution, 30% (w/w), puriss. p.a., reag. ISO, reag. Ph. Eur.
Sigma-Aldrich
Iron(II) sulfate heptahydrate, puriss., meets analytical specification of Ph. Eur., BP, USP, FCC, 99.5-104.5% (manganometric)
Sigma-Aldrich
Iron(II) sulfate heptahydrate, BioReagent, suitable for cell culture, suitable for insect cell culture, ≥99%
Sigma-Aldrich
Peróxido de hidrógeno solution, contains ~200 ppm acetanilide as stabilizer, 3 wt. % in H2O
Sigma-Aldrich
Peróxido de hidrógeno solution, contains inhibitor, 35 wt. % in H2O
Sigma-Aldrich
Peróxido de hidrógeno solution, purum p.a., ≥35% (RT)
Sigma-Aldrich
Carbonyl iron, ≥97% Fe basis
Millipore
Peróxido de hidrógeno solution, 3%, suitable for microbiology
Sigma-Aldrich
Iron(II) sulfate heptahydrate, suitable for plant cell culture, ≥99%
Sigma-Aldrich
Iron, puriss. p.a., carbonyl-Iron powder, low in magnesium and manganese compounds, ≥99.5% (RT)
Sigma-Aldrich
Iron, granular, 10-40 mesh, >99.99% trace metals basis
Sigma-Aldrich
Iron, powder, −325 mesh, 97%
Sigma-Aldrich
Iron, powder, <10 μm, ≥99.9% trace metals basis
Supelco
Peróxido de hidrógeno solution, ≥30%, for trace analysis
Sigma-Aldrich
Peróxido de hidrógeno solution, contains inhibitor, 30 wt. % in H2O, meets USP testing specifications
Sigma-Aldrich
Peróxido de hidrógeno solution, SAJ first grade, ≥30.0%
Sigma-Aldrich
Peróxido de hidrógeno solution, 34.5-36.5%
Sigma-Aldrich
Iron, foil, thickness 0.1 mm, ≥99.9% trace metals basis
Supelco
Peróxido de hidrógeno solution, 30 % (w/w), for ultratrace analysis
Sigma-Aldrich
Iron, chips, 99.98% trace metals basis
Sigma-Aldrich
Iron, wire, diam. 1.0 mm, ≥99.9% trace metals basis
Sigma-Aldrich
Iron, nanopowder, 35-45 nm particle size, 99.5% trace metals basis
Iron, foil, 100x100mm, thickness 0.25mm, hard, 99.5%
Sigma-Aldrich
Iron, foil, thickness 0.25 mm, ≥99.99% trace metals basis