Saltar al contenido
MilliporeSigma

Silver nanoparticles-decorated polyphosphazene nanotubes: synthesis and applications.

Nanoscale (2013-07-16)
Minghuan Wang, Jianwei Fu, Dandan Huang, Chao Zhang, Qun Xu
RESUMEN

Herein, we report the preparation of poly (cyclotriphosphazene-co-4,4'-sulfonyldiphenol) (PZS) nanotubes decorated with Ag nanoparticles (NPs). The PZS nanotubes have been synthesized firstly via an in situ template approach, and then Ag nanoparticles were prepared via in situ reduction of AgNO3 with NaBH4 as the reductant, supported on the surface of the PZS nanotubes. The as-obtained PZS nanotubes and PZS@Ag NPs composites were characterized by means of Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), transmission electron microscopy (TEM) equipped with energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), atomic absorption spectroscopy (AAS), thermogravimetric analysis (TGA), and UV-vis spectroscopy. Characterization results showed that Ag NPs with good dispersibility were well anchored onto the surface of the PZS nanotubes with superior thermal stability. In addition, the catalytic activities and reusability of these composites were investigated by employing the reduction of 4-nitrophenol (4-NP) into 4-aminophenol (4-AP) by NaBH4 as a model reaction.

MATERIALES
Referencia del producto
Marca
Descripción del producto

Sigma-Aldrich
Nitrato de plata, ACS reagent, ≥99.0%
Sigma-Aldrich
Borohidruro de sodio, powder, ≥98.0%
Sigma-Aldrich
Nitrato de plata, ReagentPlus®, ≥99.0% (titration)
Sigma-Aldrich
Borohidruro de sodio, ReagentPlus®, 99%
Sigma-Aldrich
4-Aminophenol, ≥98%
Sigma-Aldrich
4-Nitrophenol, ReagentPlus®, ≥99%
Sigma-Aldrich
Nitrato de plata, 99.9999% trace metals basis
Sigma-Aldrich
Nitrato de plata, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., ≥99.8%
Sigma-Aldrich
Borohidruro de sodio, granular, 99.99% trace metals basis
Sigma-Aldrich
Borohidruro de sodio, purum p.a., ≥96% (gas-volumetric)
Sigma-Aldrich
Nitrato de plata, puriss. p.a., ≥99.5% (AT)
Sigma-Aldrich
Nitrato de plata, meets analytical specification of Ph. Eur., BP, USP, 99.8-100.5%
Sigma-Aldrich
4-Nitrophenol solution, 10 mM
Sigma-Aldrich
Nitrato de plata solution, 2.5 % (w/v) AgNO3 in H2O
Sigma-Aldrich
Nitrato de plata, BioReagent, suitable for plant cell culture, >99% (titration)
Sigma-Aldrich
Sodium borohydride solution, ~12 wt. % in 14 M NaOH
Sigma-Aldrich
Borohidruro de sodio, granular, 10-40 mesh, 98%
Sigma-Aldrich
Silver nitrate on silica gel, extent of labeling: ~10 wt. % loading, +230 mesh
Sigma-Aldrich
Borohidruro de sodio, caplets (18 × 10 × 8 mm), 98%
Sigma-Aldrich
Sodium borohydride solution, 2.0 M in triethylene glycol dimethyl ether
Sigma-Aldrich
Borohidruro de sodio, powder
Supelco
4-Aminophenol, Pharmaceutical Secondary Standard; Certified Reference Material
Sigma-Aldrich
4-Nitrophenol, spectrophotometric grade
Sigma-Aldrich
Nitrato de plata, BioXtra, >99% (titration)
Sigma-Aldrich
Nitrato de plata solution, 0.0282 M
Sigma-Aldrich
Nitrato de plata solution, 0.05 M
Supelco
4-Aminophenol, PESTANAL®, analytical standard
Sigma-Aldrich
Nitrato de plata solution, suitable for atomic absorption spectrometry, 1 mg/mL Ag, 1000 ppm Ag
Supelco
4-Nitrophenol, PESTANAL®, analytical standard
Sigma-Aldrich
Nitrato de plata, tested according to Ph. Eur.