Saltar al contenido
MilliporeSigma

Catalytic oxidation of benzene with ozone over Mn/KIT-6.

Journal of nanoscience and nanotechnology (2013-05-08)
Jong Hwa Park, Ji Man Kim, Jongsoo Jurng, Gwi-Nam Bae, Sung Hoon Park, Sang Chai Kim, Jong-Ki Jeon, Young-Kwon Park
RESUMEN

Benzene is one of the target compounds to be removed from air owing to its carcinogenicity. In this study, benzene oxidation with ozone over a MnOx/KIT-6 catalyst was carried out for the first time. MnOx/KIT-6 was synthesized using two different Mn precursors: Mn acetate and Mn nitrate. The characteristics of the synthesized catalysts were examined by X-ray diffraction, X-ray photoelectron spectroscopy, temperature-programmed reduction, Brunauer-Emmett-Teller (BET) surface area, and N2 adsorption-desorption. The catalytic activity was found to be dependent on the amount of ozone consumed and the dispersion and reducibility of MnOx on the catalyst surface.

MATERIALES
Referencia del producto
Marca
Descripción del producto

Sigma-Aldrich
Benceno, suitable for HPLC, ≥99.9%
Sigma-Aldrich
Benceno, ACS reagent, ≥99.0%
Supelco
Benceno, analytical standard
Sigma-Aldrich
Benceno, puriss. p.a., reag. Ph. Eur., ≥99.7%
Sigma-Aldrich
Benceno, anhydrous, 99.8%
Sigma-Aldrich
Manganese, powder, ≥99.9% trace metals basis
Supelco
Benzene solution, certified reference material, TraceCERT®, 200 μg/mL in methanol
Sigma-Aldrich
Manganese, powder, −325 mesh, ≥99% trace metals basis
Supelco
Benceno, Pharmaceutical Secondary Standard; Certified Reference Material
Sigma-Aldrich
Manganese, chips, thickness <2.0 mm, 99%
Sigma-Aldrich
Benceno, JIS special grade, ≥99.5%
Sigma-Aldrich
Benceno, SAJ first grade, ≥99.0%
Sigma-Aldrich
Benceno, JIS 300, ≥99.5%, for residue analysis