Saltar al contenido
MilliporeSigma

An ultrasonic assisted extraction procedure to free fatty acids from the liver samples of mice.

Journal of chromatographic science (2012-10-09)
Liyan Liu, Lixin Na, Yucun Niu, Fuchuan Guo, Ying Li, Changhao Sun
RESUMEN

A procedure was evaluated for the extraction of 16 free fatty acids (FFAs) from liver. Ultrasonic energy was used for the extraction and the variables affecting the extraction efficiency were investigated. The best conditions for extraction were: 2 mL isopropanol-n-hexane (3:2, v/v), 20 min and 80 w. Recoveries ranging from 87.00 to 120.00% were obtained under the optimum conditions, and the linearity as correlation coefficient was higher than 0.9914. Analytical results for the 16 FFAs in the same liver sample, analyzed by ultrasound-assisted and conventional extraction, showed acceptable agreement, thus suggesting the possibility of using ultrasound-assisted extraction instead of the conventional procedure. Moreover, the ultrasound-assisted extraction was successfully applied to the determination of FFAs in the liver of mice with hyperlipidemia and normal mice.

MATERIALES
Referencia del producto
Marca
Descripción del producto

Sigma-Aldrich
Hexano, suitable for HPLC, ≥97.0% (GC)
Sigma-Aldrich
Hexano, ReagentPlus®, ≥99%
Sigma-Aldrich
Hexano, suitable for HPLC, ≥95%
Sigma-Aldrich
Hexano, Laboratory Reagent, ≥95%
Sigma-Aldrich
Hexano, HPLC Plus, for HPLC, GC, and residue analysis, ≥95%
Sigma-Aldrich
Hexano, puriss. p.a., ACS reagent, reag. Ph. Eur., ≥99% (GC)
Sigma-Aldrich
Hexano, anhydrous, 95%
Supelco
Hexano, analytical standard
Sigma-Aldrich
Hexano, JIS special grade, ≥96.0%
Sigma-Aldrich
Hexano, SAJ first grade, ≥95.0%
Sigma-Aldrich
Hexano, suitable for HPLC
Sigma-Aldrich
Hexano, HPLC Plus, for HPLC, GC, and residue analysis, ≥95%
Sigma-Aldrich
Hexane-1-13C, 99 atom % 13C
Sigma-Aldrich
Hexano, JIS 300, ≥96.0%, for residue analysis
Sigma-Aldrich
Hexano, JIS 1000, ≥96.0%, for residue analysis
Sigma-Aldrich
Hexano, for residue analysis, JIS 5000
Sigma-Aldrich
Hexano, ≥96.0%, suitable for residual phthalate analysis