Saltar al contenido
MilliporeSigma

745839

Sigma-Aldrich

ICBA

99.9% (HPLC)

Sinónimos:

1′,1′′,4′,4′′-Tetrahydro-di[1,4]methanonaphthaleno[1,2:2′,3′,56,60:2′′,3′′][5,6]fullerene-C60, C60 derivative, indene-C60 bisadduct

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización


About This Item

Fórmula empírica (notación de Hill):
C78H16
Número de CAS:
Peso molecular:
952.96
Código UNSPSC:
12352103
NACRES:
NA.23

Ensayo

99.9% (HPLC)

Formulario

solid

mp

236-241 °C

¿Está buscando productos similares? Visita Guía de comparación de productos

Descripción general

The performance of indene-C60 bisadduct (ICBA) as organic solar cell (OSC) has been described in a study. Simple preparation and high solubility in organic solvents renders ICBA as an efficient substitute to [6,6]-phenyl-C61 butyric acid methyl ester (PCBM).

Aplicación

A ternary bulk heterojunction system (BHJ) may be fabricated with ICBA/ low band gap polymer, for IR sensitized organic solar cells. 1-3ICBA/thiazolo-thiazolo donor polymer blend may be used to enhance the charge generation in BHJ solar cells.
The addition of substituents to a fullerene cage and chemical characterization of the indene-C60 multiadduct gives rise to a reduction of the electron affi nity of the acceptor; resulting in a signifi cant increase in the V oc of devices incorporating these derivatives as the electron acceptor.
Solar Cell (OPV) Device Performance:
ITO/PEDOT:PSS/P3HT:ICBA(1.5:1)/LiF/Al
  • Short-circuit current density (Jsc): 10.53 mA/cm2
  • Open-circuit voltage (Voc): 0.83 V
  • Fill Factor (FF): 0.60
  • Power Conversion Efficiency (PCE): 5.26 %

Información legal

Plexcore is a registered trademark of Plextronics; Inc.

Pictogramas

Exclamation mark

Palabra de señalización

Warning

Frases de peligro

Clasificaciones de peligro

Eye Irrit. 2 - Skin Irrit. 2 - STOT SE 3

Órganos de actuación

Respiratory system

Código de clase de almacenamiento

11 - Combustible Solids

Clase de riesgo para el agua (WGK)

WGK 3

Punto de inflamabilidad (°F)

Not applicable

Punto de inflamabilidad (°C)

Not applicable


Elija entre una de las versiones más recientes:

Certificados de análisis (COA)

Lot/Batch Number

¿No ve la versión correcta?

Si necesita una versión concreta, puede buscar un certificado específico por el número de lote.

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

Los clientes también vieron

Sih-Hao Liao et al.
Journal of the American Chemical Society, 134(35), 14271-14274 (2012-08-18)
We present a novel electron transport (ET) polymer composed of polyfluorene grafted with a K(+)-intercalated crown ether involving six oxygen atoms (PFCn6:K(+)) for bulk-heterojunction polymer solar cells (PSCs) with regioregular poly(3-hexylthiophene) (P3HT) as the donor and indene-C(60) bisadduct (ICBA) or
Charge Photogeneration for a Series of Thiazolo-Thiazole Donor Polymers Blended with the Fullerene Electron Acceptors PCBM and ICBA.
Shoaee S, et al.
Advances in Functional Materials, 23(26), 3286-3298 (2013)
Comparative study of spectral and morphological properties of blends of P3HT with PCBM and ICBA.
Lin YH, et al.
Organic Electronics, 13(11), 2333-2341 (2012)

IR sensitization of an indene-C60 bisadduct (ICBA) in ternary organic solar cells
Ameri T, et al.
Energy & Environmental Science, 6 (2013)
Beyond PCBM: Understanding the Photovoltaic Performance of Blends of Indene-C60 Multiadducts with Poly(3-hexylthiophene)
Nardes, A. M.; et al.
Advances in Functional Materials, 22, 4115-4127 (2012)

Artículos

Fabrication procedure of organic field effect transistor device using a soluble pentacene precursor.

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico