CN0601T06

Polygard-CN 筒式过滤器 10 in.0.6 µm 0 号 PTFE 包覆氟橡胶

pore size 0.6 μm, cartridge nominal length 10 in. (25 cm), Code 0 (2-222; O-rings)

• 同義詞: Polygard^® CN筒式滤芯
• 分類程式碼代碼: 23151806
• eCl@ss: 32031690

屬性

• 材料: PTFE seal; polypropylene
• 品質等級: 400
• 特點: hydrophilic
• 製造商／商標名: Polygard
• 參數: 4.8 bar max. differential pressure (70 psid) at 25 °C; 4.8 bar max. inlet pressure (70 psi) at 25 °C
• 柱標稱長度: 10 in. (25 cm)
• 直徑: 7.0 cm (2.75 in.)
• 過濾面積: 0.42 m²
• 雜質: ≤0.5 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
• 重量法萃取物: ≤50 mg
• 孔徑: 0.6 μm nominal pore size; 0.6 μm pore size
• 輸入: sample type liquid
• 柱代碼: Code 0 (2-222; O-rings)

描述

一般說明

Device Configuration: Cartridge

準備報告

Sanitization Protocol
30 min with hot water @ 80 °C

Sterilization Method
10 autoclave cycles or SIP @ 126 °C for 30 min

分析報告

Gravimetric Extractables: after 24-h soak in water

Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥5 L

其他說明

Directions for Use

• Organism Retention: Microorganism reduction
• Mode of Action: Filtration (nominal)
• Application: BioProcessing
• Intended Use: Efficient particle and microorganism reduction
• Instructions for Use: Please refer to the Polygard^® and CLARIGARD^® Cartridges user guide
• Storage Statement: Store in dry location
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

法律資訊

CLARIGARD is a registered trademark of Merck KGaA, Darmstadt, Germany

POLYGARD is a registered trademark of Merck KGaA, Darmstadt, Germany