推荐产品
材料
mixed cellulose esters (MCE) (low protein-binding)
品質等級
無菌
non-sterile
滅菌相容性
autoclavable compatible
steam-in-place compatible
產品線
Milligard®
特點
hydrophilic
製造商/商標名
Milligard®
技術
prefiltration: suitable
長度
10 in.
寬度
2.9 in.
柱標稱長度
10 in. (25 cm)
過濾面積
0.7 m2
雜質
<0.5 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
重量法萃取物
≤200 mg/cartridge
基質
Milligard® LPB
pore size
0.5/0.2 μm nominal pore size
0.5/0.2 μm pore size
輸入
sample type liquid
柱代碼
Code 0 (2-222; O-rings)
正在寻找类似产品? 访问 产品对比指南
一般說明
Device Configuration: Cartridge
特點和優勢
Format: Double Layer
其他說明
These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
Directions for Use:
- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: BioProcessing
- Intended Use: Reduction or removal of microorganism/bioburden
- Instructions for Use: Please refer to the installation and wetting sections of OptiScale®-25 user guide and introduction section of the Mixed cellulose esters Tech Brief
- Storage Statement: Please refer to the Mixed cellulose esters Tech Brief
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
規格
Filter Grade: Low Protein Binding Milligard® Media
準備報告
This product was manufactured with a media combination which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
分析報告
Gravimetric Extractables: after a 5 L flush and 24 hours in water at controlled room temperature
法律資訊
MILLIGARD is a registered trademark of Merck KGaA, Darmstadt, Germany
OptiScale is a registered trademark of Merck KGaA, Darmstadt, Germany
未找到合适的产品?
试试我们的产品选型工具.
訊號詞
Danger
危險聲明
危險分類
Flam. Sol. 1
儲存類別代碼
4.1B - Flammable solid hazardous materials
水污染物質分類(WGK)
WGK 2
我们的科学家团队拥有各种研究领域经验,包括生命科学、材料科学、化学合成、色谱、分析及许多其他领域.
联系技术服务部门