CN5001E06

Polygard-CN 筒式过滤器 10 in.5.0 µm 0 号 乙丙橡胶

pore size 5.0 μm, cartridge nominal length 10 in. (25 cm), Code 0 (2-222; O-rings)

• 别名: Polygard^® CN筒式滤芯
• 分類程式碼代碼: 23151806
• eCl@ss: 32031690

属性

• 材料: EPR seal; polypropylene ; polypropylene support
• 品質等級: 400
• 特點: hydrophilic
• 製造商／商標名: Polygard
• 參數: 4.8 bar max. differential pressure (70 psid) at 25 °C; 4.8 bar max. inlet pressure (70 psi) at 25 °C
• 柱標稱長度: 10 in. (25 cm)
• 直徑: 7.0 cm (2.75 in.)
• 過濾面積: 0.42 m²
• 雜質: ≤0.5 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
• 重量法萃取物: ≤50 mg
• 孔徑: 5.0 μm nominal pore size; 5.0 μm pore size
• 輸入: sample type liquid
• 柱代碼: Code 0 (2-222; O-rings)

说明

一般說明

The Polygard^® CN Cartridge Filter products are nominally rated filters designed for particle removal applications in liquids and gases. The pleated structure of Polygard^®-CN filter media minimizes pressure differentials during the filtration process, a 5.0 μm pore size and the all-polypropylene construction of these filters conveys low levels of extractables and broad chemical compatibility. Downstream filter performance is enhanced due to efficient particle and microorganism reduction.

Polygard-CN cartridge filters provide high throughput with 4.8 bar max. differential pressure (70 psid) at 25 °C Cartridges are robust, strong, resilient and are designed to withstand multiple steam-in-place cycles.

Typical Applications
Polygard-CN cartridge filters are widely used in the beverage industry for liquid and gas filtration applications, for fining operations and bioburden reduction.

Regulatory Compliance
Polygard^® CN Cartridge Filters are designed, developed, and manufactured in accordance with a Quality Management System approved by an accredited registering body to an ISO 9000 Quality Systems Standard and are shipped with a Certificate of Quality. Each cartridge filter is supported by a Validation Guide for compliance with regulatory requirements.

For traceability and easy identification, each cartridge filter is marked with identifying characteristics.

Multiple Formats Available
A full range of Polygard^® CN Cartridge Filter sizes is available to suit your application requirements. A variety of connection options are offered for easy adaptation to existing housings.

規格

Filter Grade: AP20

準備報告

Sanitization Protocol
30 min with hot water @ 80 °C

Sterilization Method
10 autoclave cycles or SIP @ 126 °C for 30 min

分析報告

Gravimetric Extractables: after 24-h soak in water

Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥5 L

其他說明

Directions for Use

• Organism Retention: Microorganism reduction
• Mode of Action: Filtration (nominal)
• Application: BioProcessing
• Intended Use: Efficient particle and microorganism reduction
• Instructions for Use: Please refer to the Polygard^® and CLARIGARD^® Cartridges user guide
• Storage Statement: Store in dry location
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

法律資訊

CLARIGARD is a registered trademark of Merck KGaA, Darmstadt, Germany

POLYGARD is a registered trademark of Merck KGaA, Darmstadt, Germany