Skip to Content
Merck
  • Multi-residue method for determination of 238 pesticides in Chinese cabbage and cucumber by liquid chromatography-tandem mass spectrometry: comparison of different purification procedures.

Multi-residue method for determination of 238 pesticides in Chinese cabbage and cucumber by liquid chromatography-tandem mass spectrometry: comparison of different purification procedures.

Journal of agricultural and food chemistry (2014-11-08)
Mei-Ai Zhao, Ya-Nan Feng, Yong-Zhe Zhu, Jeong-Han Kim
ABSTRACT

This paper describes the comparison of five sample cleanup procedures for the determination of 238 pesticides via triple quadrupole liquid chromatography-tandem mass spectrometry (LC-MS/MS, with only 10 min of chromatographic running time) in Chinese cabbage and cucumber. Samples were extracted with a quick, easy, cheap, effective, rugged, and safe (QuECHERS) preparation method and cleanup with different sorbents, including primary secondary amine (PSA), multi-walled carbon nanotubes (MWCNTs), and polystyrene (PLS), to find out the most suitable cleanup methods for Chinese cabbage and cucumber. The recovery and matrix effect were evaluated by monitoring the main parameters in one group of 238 pesticides at the spiked level of 8 and 40 μg/kg. In Chinese cabbage, when PSA dispersive solid-phase extraction (D-SPE) was applied, recoveries of 183 pesticides ranged between 70 and 120% with relative standard deviation (RSD) values lower than 20% at a spiked level of 40 μg/kg, indicating the effectiveness of the purification step. In cucumber, 203 pesticides were in the 70-120% recovery range with good reproducibility by PSA mini-cartridge column cleanup at a spiked level of 40 μg/kg and RSD values were generally below 20%. The limits of quantitation [LOQs; signal-to-noise (S/N) = 10] were in the range of 0.16-10.20 μg/kg for Chinese cabbage and 0.06-21.06 μg/kg for cucumber, while the limits of detection (LODs; S/N = 3) were between 0.05 and 3.06 μg/kg and between 0.02 and 6.32 μg/kg in Chinese cabbage and cucumber, respectively. The proposed methods that might be applied for the multi-residue analysis in Chinese cabbage and cucumber are contributed to their rapid speed and good recoveries.

MATERIALS
Product Number
Brand
Product Description

Supelco
Sodium chloride, Pharmaceutical Secondary Standard; Certified Reference Material
Sigma-Aldrich
Sodium chloride, AR, ≥99.9%
Supelco
Sodium Citrate, Pharmaceutical Secondary Standard; Certified Reference Material
Supelco
Methanol, Pharmaceutical Secondary Standard; Certified Reference Material
Sigma-Aldrich
Methanol, Absolute - Acetone free
Sigma-Aldrich
Ammonium formate, reagent grade, 97%
Sigma-Aldrich
Methanol, ACS reagent, ≥99.8%
Sigma-Aldrich
Methanol, ACS reagent, ≥99.8%
Sigma-Aldrich
Methanol, ACS reagent, ≥99.8%
Sigma-Aldrich
Methanol, puriss., meets analytical specification of Ph Eur, ≥99.7% (GC)
Sigma-Aldrich
Methanol, BioReagent, ≥99.93%
Sigma-Aldrich
Methanol, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., ≥99.8% (GC)
Sigma-Aldrich
Methanol, ACS spectrophotometric grade, ≥99.9%
Sigma-Aldrich
Methanol, Laboratory Reagent, ≥99.6%
Sigma-Aldrich
Methanol, HPLC Plus, ≥99.9%
Sigma-Aldrich
Methanol, suitable for HPLC, gradient grade, ≥99.9%
Sigma-Aldrich
Methanol, suitable for HPLC, ≥99.9%
Sigma-Aldrich
Methanol, NMR reference standard
SAFC
Sodium chloride solution, 5 M
Sigma-Aldrich
Sodium chloride, BioPerformance Certified, ≥99% (titration), suitable for insect cell culture, suitable for plant cell culture
Supelco
Diafenthiuron, PESTANAL®, analytical standard
Supelco
Methanol, analytical standard
Sigma-Aldrich
Sodium chloride, ≥99%, AR grade
Sigma-Aldrich
Sodium chloride, 99.999% trace metals basis
Supelco
Triflumuron, PESTANAL®, analytical standard
Sigma-Aldrich
Ammonium formate, ≥99.995% trace metals basis
Sigma-Aldrich
Methanol, anhydrous, 99.8%
Sigma-Aldrich
Sodium chloride, AnhydroBeads, −10 mesh, 99.999% trace metals basis
Supelco
Terbuthylazine, PESTANAL®, analytical standard
Sigma-Aldrich
Sodium chloride, tested according to Ph. Eur.