The effect of different implant-abutment connections on screw joint stability.

The effect of different implant-abutment connections on screw joint stability.

The Journal of oral implantology (2014-05-02)

Konstantinos X Michalakis, Pasquale Lino Calvani, Sinan Muftu, Argiris Pissiotis, Hiroshi Hirayama

ABSTRACT

Dental implants with an internal connection have been designed to establish a better stress distribution when lateral external forces act on the prosthesis and minimize the forces transmitted to the fastening screw. In the present study, 10 externally and 10 internally hexed implants were tested with a compressive force applied with an Instron Universal machine. Four cycles of loading-unloading were applied to each specimen to achieve displacements of 0.5, 1, 2, and 2.5 mm. The mean loads for the first cycle were 256.70 N for the external connection and 256 N for the internal connection implants. The independent t test did not reveal any significant differences among the 2 tested groups (P = .780). For the second cycle, the mean loads needed for a displacement of 1 mm were 818.19 N and 780.20 N for the external connection and the internal connection implants, respectively. The independent t test revealed significant differences among the 2 tested groups (P < .001). In the third cycle, the mean load values for a 2-mm displacement were 1394.10 N and 1225.00 N. The independent t test revealed significant differences among the 2 tested groups (P < .001). The mean loads for the fourth cycle were 1488.00 N for the external connection and 1029.00 N for the internal connection implants. These loads were required for a displacement of 2.5 mm. The independent t test revealed significant differences among the 2 tested groups (P < .001). The results of this in vitro study suggest that the internal connection design of the examined implant system could not prevent screw loosening during overloading. No implant or prosthesis failure was noticed in either group.

MATERIALS

Product Number

Brand

Product Description

GF32270015

Titanium, tube, 200mm, outside diameter 2.03mm, inside diameter 1.55mm, wall thickness 0.24mm, annealed, 99.6+%

GF23860144

Titanium, tube, 500mm, outside diameter 6.35mm, inside diameter 4.57mm, wall thickness 0.89mm, annealed, 99.6+%

GF05925281

Titanium, microfoil, disks, 10mm, thinness 0.1μm, specific density 42.8μg/cm², permanent mylar 3.5μm support, 99.6+%

GF54978249

Titanium, rod, 200mm, diameter 4mm, annealed, 99.6+%

GF26602321

Titanium, tube, 500mm, outside diameter 25.4mm, inside diameter 23.62mm, wall thickness 0.89mm, annealed, 99.6+%

GF03916290

Titanium, rod, 490mm, diameter 2mm, annealed, 99.6+%

GF36425707

Titanium, wire reel, 200m, diameter 0.20mm, annealed, 99.6+%

GF50171318

Titanium, rod, 25mm, diameter 16mm, as drawn, 99.99+%

GF51463357

Titanium, tube, 200mm, outside diameter 10.3mm, inside diameter 8.7mm, wall thickness 0.8mm, annealed, 99.6+%

GF41437830

Titanium, tube, 100mm, outside diameter 1.05mm, inside diameter 0.75mm, wall thickness 0.15mm, annealed, 99.6+%

GF48167590

Titanium, tube, 100mm, outside diameter 6.1mm, inside diameter 5.1mm, wall thickness 0.5mm, annealed, 99.6+%

GF91859967

Titanium, rod, 100mm, diameter 9.5mm, annealed, 99.99+%

GF32919925

Titanium, tube, 500mm, outside diameter 10.3mm, inside diameter 8.7mm, wall thickness 0.8mm, annealed, 99.6+%

GF64061760

Titanium, rod, 1000mm, diameter 16mm, annealed, 99.6+%

GF46592949

Titanium, wire, straight, 1000mm, diameter 1.0mm, as drawn, 99.6+%

GF43519945

Titanium, wire reel, 2m, diameter 1.0mm, as drawn, 99.99+%

GF34996685

Titanium, wire reel, 200m, diameter 0.125mm, annealed, 99.6+%

GF82495198

Titanium, rod, 200mm, diameter 9.5mm, annealed, 99.99+%

GF04311638

Titanium, rod, 100mm, diameter 6mm, annealed, 99.6+%

GF08595119

Titanium, wire reel, 100m, diameter 1.0mm, annealed, 99.6+%

GF54883581

Titanium, rod, 1000mm, diameter 3.0mm, annealed, 99.6+%

GF49264713

Titanium, tube, 200mm, outside diameter 1.6mm, inside diameter 1.2mm, wall thickness 0.2mm, hard, 99.6+%

GF94150593

Titanium, wire reel, 10m, diameter 1.5mm, as drawn, 99.6+%

GF76772391

Titanium, rod, 100mm, diameter 10mm, annealed, 99.6+%

GF62977540

Titanium, tube, 200mm, outside diameter 2.03mm, inside diameter 1.63mm, wall thickness 0.2mm, annealed, 99.6+%

GF82635138

Titanium, tube, 500mm, outside diameter 6.35mm, inside diameter 5.53mm, wall thickness 0.41mm, annealed, 99.6+%

GF52551222

Titanium, microfoil, disks, 10mm, thinness 0.25μm, specific density 112.6μg/cm², permanent mylar 3.5μm support, 99.6+%

GF32801251

Titanium, tube, 1000mm, outside diameter 1.05mm, inside diameter 0.75mm, wall thickness 0.15mm, annealed, 99.6+%

GF96391402

Titanium, wire reel, 25m, diameter 0.20mm, annealed, 99.6+%

GF62676759

Titanium, rod, 200mm, diameter 2mm, as drawn, 99.99+%