Skip to Content
Merck
  • Air to lung partition coefficients for volatile organic compounds and blood to lung partition coefficients for volatile organic compounds and drugs.

Air to lung partition coefficients for volatile organic compounds and blood to lung partition coefficients for volatile organic compounds and drugs.

European journal of medicinal chemistry (2007-06-05)
Michael H Abraham, Adam Ibrahim, William E Acree
ABSTRACT

Values of in vitro gas to lung partition coefficients, K(lung), of VOCs have been collected from the literature. For 44 VOCs, application of the Abraham solvation equation to log K(lung) yielded a correlation with R(2)=0.968 and S.D.=0.25 log units. Combination of the log K(lung) values with log K(blood) values leads to in vitro blood to lung partition coefficients, log P(lung) for 43 VOCs; an Abraham solvation equation correlated these values with a very poor R(2)=0.262 but with a very good S.D.=0.190 log units. Values of in vivo log P(lung) for 80 drugs were collected, and were correlated with R(2)=0.647 and S.D.=0.51 log units. When the log P(lung) values for VOCs and drugs were combined, an Abraham solvation equation could correlate the 123 compounds with R(2)=0.676 and S.D.=0.43 log units. Division of the 123 compounds into a training set and a test set, showed that the training equation could predict log P(lung) values with an average error of 0.001 and a standard deviation of 0.44 log units; for drugs in the combined test set the average error was 0.02 and the standard deviation 0.43 log units.

MATERIALS
Product Number
Brand
Product Description

Supelco
Ethanol solution, certified reference material, 2000 μg/mL in methanol
Supelco
Ethylene oxide solution, certified reference material, 50 mg/mL in methanol
Supelco
Chloroform solution, certified reference material, 5000 μg/mL in methanol
Sigma-Aldrich
Salicylic acid, ACS reagent, ≥99.0%
Sigma-Aldrich
Acetone, ≥99%, meets FCC analytical specifications
Sigma-Aldrich
Chloroform, anhydrous, ≥99%, contains 0.5-1.0% ethanol as stabilizer
Sigma-Aldrich
Acetone, natural, ≥97%
Sigma-Aldrich
Acrylic acid, anhydrous, contains 200 ppm MEHQ as inhibitor, 99%
Sigma-Aldrich
Salicylic acid, ≥99%, FG
Sigma-Aldrich
Heptane, biotech. grade, ≥99%
Sigma-Aldrich
Diethyl ether
Sigma-Aldrich
2-Methyl-1-propanol, anhydrous, 99.5%
Sigma-Aldrich
Propylene, ≥99%
Supelco
Acetone, analytical standard
Supelco
Methanol, analytical standard
Supelco
1-Propanol, analytical standard
Supelco
Chloroform, analytical standard
Supelco
Cyclohexane, analytical standard
Pyrene, BCR®, certified reference material
Sigma-Aldrich
Pyrene, puriss. p.a., for fluorescence, ≥99.0% (GC)
Sigma-Aldrich
1-Propanol, ≥99%, FG
Sigma-Aldrich
1-Propanol, natural, ≥98%, FG
Sigma-Aldrich
Isopropyl alcohol, ≥99.7%, FCC, FG
Sigma-Aldrich
Reagent Alcohol, reagent grade
Sigma-Aldrich
1-Propanol, ≥99%
Sigma-Aldrich
Salicylic acid, puriss. p.a., ≥99.0% (T)
Sigma-Aldrich
Salicylic acid, ReagentPlus®, ≥99%
Sigma-Aldrich
2-Propylpentanoic acid
Sigma-Aldrich
Barbital
Sigma-Aldrich
Ethanol Fixative 80% v/v, suitable for fixing solution (blood films)