Skip to Content
Merck
  • Levels of 7-oxocholesterol in cerebrospinal fluid are more than one thousand times lower than reported in multiple sclerosis.

Levels of 7-oxocholesterol in cerebrospinal fluid are more than one thousand times lower than reported in multiple sclerosis.

Journal of lipid research (2004-12-04)
Valerio Leoni, Dieter Lütjohann, Thomas Masterman
ABSTRACT

In a recent publication [Diestel, A., O. Aktas, D. Hackel, I. Hake, S. Meier, C. S. Raine, R. Nitsch, F. Zipp, and O. Ullrich. 2003. Activation of microglial poly (ADP-ribose)-polymerase-1 by cholesterol breakdown products during neuroinflammation: a link between demyelination and neuronal damage. J. Exp. Med. 198: 1729-1740], extremely high levels of 7-oxocholesterol were reported in cerebrospinal fluid (CSF) of 11 patients with multiple sclerosis (MS) [7.4 +/- 0.3 mg/l (mean +/- SEM)]. The corresponding level of 12 subjects with other kinds of neurological diseases was reported to be 0.5 +/- 0.1 mg/l. Such high levels of 7-oxocholesterol were found to cause neuronal damage of living brain tissues. Using a highly accurate method for an assay of 7-oxocholesterol based on isotope dilution-mass spectrometry and anaerobic conditions during workup, we found that the level of 7-oxocholesterol in CSF from 29 Swedish patients with MS was only 1.2 microg/l (median, ranging from 0.4 to 4.6 microg/l), less than 1/1,000 th of the previously reported level. The level of 7-oxocholesterol in CSF from 24 Swedish control patients was 0.9 microg/l (0.3-2.3 microg/l), slightly but significantly lower than the CSF level in MS patients (P=0.002). In vitro-induced lipid peroxidation of the endogenous cholesterol in CSF increased the level of 7-oxygenated cholesterol metabolites, particularly 7-oxocholesterol, up to approximately 0.3 mg/l. These results are discussed in relation to the fact that 7-oxygenated steroids are easily artificially formed by autoxidation of cholesterol during workup procedures and analysis of sterols and oxysterols from biological samples.

MATERIALS
Product Number
Brand
Product Description

Supelco
Acetic acid, analytical standard
Titanium, IRMM®, certified reference material, 0.5 mm foil
Sigma-Aldrich
Magnesium, in a Sure/Seal bottle, turnings, 37.5 mmol
Sigma-Aldrich
Zinc, shot, <12 mm, 99.99% trace metals basis
Continuous cast copper (O), BCR®, certified reference material, rod
Sigma-Aldrich
Magnesium, powder, ≥99%
Sigma-Aldrich
Magnesium, grit, ≥99.0% (KT)
Sigma-Aldrich
Magnesium, purum, for Grignard reactions, ≥99.5%, turnings
Sigma-Aldrich
Acetic acid, for luminescence, BioUltra, ≥99.5% (GC)
Sigma-Aldrich
Aluminum, powder, ≥91% (complexometric)
Sigma-Aldrich
Magnesium, ribbon, ≥99.0% Mg basis
Sigma-Aldrich
Nickel, rod, diam. 6.35 mm, ≥99.99% trace metals basis
Sigma-Aldrich
Manganese, powder, ≥99.9% trace metals basis
Sigma-Aldrich
Acetic acid, ≥99.5%, FCC, FG
Sigma-Aldrich
Acetic acid, natural, ≥99.5%, FG
Sigma-Aldrich
Titanium, foil, thickness 0.127 mm, 99.7% trace metals basis
Sigma-Aldrich
Titanium, wire, diam. 1.0 mm, 99.99% trace metals basis
Sigma-Aldrich
Magnesium, turnings, reagent grade, 98%
Sigma-Aldrich
Strontium, granular, 99% trace metals basis
Sigma-Aldrich
Magnesium, dendritic pieces, purified by distillation, 99.998% trace metals basis
Sigma-Aldrich
Strontium, dendritic pieces, purified by distillation, 99.99% trace metals basis
Titanium, IRMM®, certified reference material, 0.5 mm wire
Sigma-Aldrich
Zinc, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., ≥99.9%, granular
Aluminum, IRMM®, certified reference material, 1.0 mm foil
Sigma-Aldrich
Copper, foil, ≥99.8% (complexometric)
Sigma-Aldrich
Zinc, shot, 5 mm, 99.999% trace metals basis
Sigma-Aldrich
Tungsten, foil, thickness 0.25 mm, ≥99.9% trace metals basis
Sigma-Aldrich
Tin, granular, 0.425-2.0 mm particle size, ≥99.5%, ACS reagent
Sigma-Aldrich
Zinc, sticks, diam. 7-10 mm, 99.97% trace metals basis
Sigma-Aldrich
Vanadium, powder, −325 mesh, 99.5% trace metals basis