- Recent advances in homogeneous nickel catalysis.
Recent advances in homogeneous nickel catalysis.
Nature (2014-05-16)
Sarah Z Tasker, Eric A Standley, Timothy F Jamison
PMID24828188
ABSTRACT
Tremendous advances have been made in nickel catalysis over the past decade. Several key properties of nickel, such as facile oxidative addition and ready access to multiple oxidation states, have allowed the development of a broad range of innovative reactions. In recent years, these properties have been increasingly understood and used to perform transformations long considered exceptionally challenging. Here we discuss some of the most recent and significant developments in homogeneous nickel catalysis, with an emphasis on both synthetic outcome and mechanism.
MATERIALS
Product Number
Brand
Product Description
Nickel, tube, 500mm, outside diameter 2.0mm, inside diameter 1.6mm, wall thickness 0.2mm, hard, 99.5%
Nickel, foil, 25x25mm, thickness 2.0mm, as rolled, 99.99+%
Nickel, foil, not light tested, 150x150mm, thickness 0.0125mm, annealed, 99%
Nickel, foil, 25x25mm, thickness 0.15mm, annealed, 99%
Nickel, mesh, 100x250mm, nominal aperture 0.73mm, wire diameter 0.25mm, 26x26 wires/inch, open area 55%, plain weave mesh, 99%
Nickel, foil, 2m coil, thickness 0.025mm, 99.9%
Nickel, microfoil, disks, 25mm, thinness 0.25μm, specific density 222.55μg/cm2, permanent mylar 3.5μm support, 99.99+%
Nickel, pellets, 100g, max. size 5mm, 99.99+%
Nickel, foil, not light tested, 50x50mm, thickness 0.003mm, 99.95%
Nickel, foil, 50x50mm, thickness 0.1mm, annealed, 99%
Nickel, rod, 100mm, diameter 1.5mm, 99.99+%
Nickel, foil, 25x25mm, thickness 0.50mm, annealed, 99%
Nickel, microfoil, disks, 10mm, thinness 1.0μm, specific density 895.8μg/cm2, permanent mylar 3.5μm support, 99.99+%
Nickel, foil, 150x150mm, thickness 0.25mm, annealed, 99%
Nickel, foil, not light tested, 150x150mm, thickness 0.01mm, 99.95%
Nickel, foil, 25x25mm, thickness 0.1mm, annealed, 99%
Nickel, foil, not light tested, 100x100mm, thickness 0.007mm, 99.95%
Nickel, pellets, 100g, max. size 10mm, 99.99+%
Nickel, foil, 150x150mm, thickness 0.5mm, as rolled, 99.99+%
Nickel, foil, 150x300mm, thickness 1.0mm, annealed, 99.98%