The suspension contains approximately 2.6 × 10¹¹ particles per milliliter, which corresponds to 260 billion particles per milliliter.
This value is approximate and may vary slightly depending on handling and measurement conditions.
Przejdź do
95585
Micro particle size standard based on polystyrene monodisperse
analytical standard, size: 0.5 μm
Synonim(y):
Monodisperse polystyrene latex particles (0.5 μm), monodisperse polystyrene microbeads (0.5 μm), monodisperse polystyrene microspheres (0.5 μm), polystyrene monodisperse microparticles (0.5 μm), Size standards
Zaloguj się, aby wyświetlić ceny organizacyjne i kontraktowe.
Wybierz wielkość
Zmień widok
| Do Państwa/SKU | Dostępność | Cena netto |
|---|---|---|
5 mL | Skontaktuj się z Obsługą Klienta, aby uzyskać informacje na temat dostępności | 948,00 zł |
10 mL | Skontaktuj się z Obsługą Klienta, aby uzyskać informacje na temat dostępności | 1600,00 zł |
Informacje o tej pozycji
948,00 zł
Skontaktuj się z Obsługą Klienta, aby uzyskać informacje na temat dostępności
Pomoc techniczna
Potrzebujesz pomocy? Nasz zespół doświadczonych naukowców chętnie Ci pomoże.
Pozwól nam pomócgrade
analytical standard
Quality Segment
form
aqueous suspension, particles
crosslinking
0 % cross-linked
concentration
2% (solids)
particle size
0.5 μm std dev <0.05 μm
application(s)
glass & ceramic
industrial qc
pharmaceutical
format
neat
storage temp.
2-8°C
General description
Monodisperse polystyrene based micro particles (size: 0.5 μm) are a particle size standard, designed to profile the particle size distribution (PSD) of test samples.
Application
Used to calibrate, qualify and monitor the performance of particle size analyzers, surface scanning instruments and particle counters.
Monodisperse polystyrene latex particles are also used to find the PSD of colloidal dispersions.
Monodisperse polystyrene latex particles are also used to find the PSD of colloidal dispersions.
Features and Benefits
- suitable for routine instrument calibration checks, testing and corrections
- available in 5 mL and 10 mL pack sizes as neat samples
Analysis Note
For every lot exact values of particle size and standard deviation are determined with an accuracy of 0.001 μm. The size determination of these particles follows procedures described by National Institute of Standards and Technology (NIST, USA) respectively by the Community Bureau of Reference (BCR), esp.:
- Transmission electron microscopy (TEM)
- Scanning electron microscope
- Light microscopy
- Coulter™ counter with MDF-system
Legal Information
Coulter is a trademark of Beckman Coulter, Inc.
Ta strona może zawierać tekst przetłumaczony maszynowo.
1 of 1
Ta pozycja | |||
|---|---|---|---|
| particle size 0.5 μm std dev <0.05 μm | particle size 1.0 μm std dev <0.05 μm | particle size 0.2 μm std dev <0.03 μm | particle size 0.1 μm std dev <0.03 μm |
| format neat | format neat | format neat | format neat |
| grade analytical standard | grade analytical standard | grade analytical standard | grade analytical standard |
| application(s) glass & ceramic | application(s) cosmetics | application(s) cosmetics | application(s) cosmetics |
| concentration 2% (solids) | concentration 2% (solids) | concentration 2% (solids) | concentration 2% (solids) |
| storage temp. 2-8°C | storage temp. 2-8°C | storage temp. 2-8°C | storage temp. 2-8°C |
Still not finding the right product?
Explore all of our products under Micro particle size standard based on polystyrene monodisperse
Klasa składowania
10 - Combustible liquids
wgk
WGK 3
flash_point_f
410.0 °F
flash_point_c
210 °C
ppe
Eyeshields, Gloves
Wybierz jedną z najnowszych wersji:
Masz już ten produkt?
Dokumenty związane z niedawno zakupionymi produktami zostały zamieszczone w Bibliotece dokumentów.
-
Where can I see how many particles there are per milliliter of the suspension?
1 answer-
Helpful?
-
-
Are there any surfactants that are used for product 95585?
1 answer-
The calibration product 95585 is provided for calibration purposes as 2% w/v aqueous suspensions with a solids content of 20 mg per ml. For stability reasons, the suspension contains 0.07 wt.-% anionic surfactant (SDS) along with 0.007 wt.-% of a preserving agent (NaN3).
Helpful?
-