Skip to Content
Merck
  • Effervescent-salt-assisted dispersive micro-solid-phase extraction using mesoporous hybrid materials coupled with ultra-performance liquid chromatography for the determination of trace-level compounds in complicated plant preparations.

Effervescent-salt-assisted dispersive micro-solid-phase extraction using mesoporous hybrid materials coupled with ultra-performance liquid chromatography for the determination of trace-level compounds in complicated plant preparations.

Analytical and bioanalytical chemistry (2014-12-21)
Li-Hong Ye, Wan Cao, Shuai-Shuai Hu, Jian-Hua Da, Han-Bin Dai, Jun Cao, Jing-Jing Xu, Xiao-Qing Pang
ABSTRACT

A novel effervescent-salt-assisted dispersive micro-solid-phase extraction using mesoporous hybrid materials was developed for the extraction of minute traces of constituents in complicated plant preparations. In this study, a special tablet containing carbon dioxide sources (sodium dihydrogenphosphate and sodium carbonate) and the sorbent (mesoporous hybrid materials) was prepared. The effects of different parameters influencing the extraction efficiency such as the concentration of salts, the type and concentration of mesoporous material, pH of diluent, and desorption solvents were investigated and optimized. Results show that the proposed method using green solvents (water) as extraction solutions required low consumption of sample amount and obtained high enrichment efficiency. Moreover, under optimized conditions, the tested tanshinones exhibited good linearity (r(2) > 0.994) in the concentration range of 0.5 to 80 ng mL(-1). The limits of detection values were lower than 0.0803 pg using UV-visible detection. The developed method was successfully applied for the analysis of trace tanshinones in compound Danshen dripping pill and Danqi tablet samples.

MATERIALS
Product Number
Brand
Product Description

Sigma-Aldrich
Methanol, NMR reference standard
Sigma-Aldrich
Ammonia-14N, 99.99 atom % 14N
Supelco
SPME Fiber Assembly Polydimethylsiloxane/Divinylbenzene (PDMS/DVB), df 65 μm(PDMS/DVB, needle size 23 ga, PDMS/DVB StableFlex, for use with autosampler
Sigma-Aldrich
Acetic acid, ≥99.5%, FCC, FG
Sigma-Aldrich
Acetic acid, natural, ≥99.5%, FG
Supelco
Methanol, analytical standard
Sigma-Aldrich
Phosphoric acid solution, 85 wt. % in H2O, FCC, FG
Sigma-Aldrich
Acetic acid-12C2, 99.9 atom % 12C
Sigma-Aldrich
Acetonitrile solution, contains 0.1 % (v/v) trifluoroacetic acid, suitable for HPLC
Supelco
SPME fiber assembly Polydimethylsiloxane (PDMS), df 100 μm(PDMS, for use with manual holder, needle size 23 ga
Supelco
SPME fiber assembly Polydimethylsiloxane (PDMS), df 100 μm(PDMS, needle size 24 ga, for use with manual holder
Sigma-Aldrich
Methanol, anhydrous, 99.8%
Sigma-Aldrich
Methanol, suitable for HPLC, ≥99.9%
Sigma-Aldrich
Acetic acid solution, suitable for HPLC
Sigma-Aldrich
Methanol, BioReagent, ≥99.93%
Supelco
Residual Solvent - Acetonitrile, Pharmaceutical Secondary Standard; Certified Reference Material
Supelco
Methanol, Pharmaceutical Secondary Standard; Certified Reference Material
Sigma-Aldrich
Acetic acid, glacial, ACS reagent, ≥99.7%
Sigma-Aldrich
Methanol, Absolute - Acetone free
Sigma-Aldrich
Acetic acid, glacial, puriss., meets analytical specification of Ph. Eur., BP, USP, FCC, 99.8-100.5%
Sigma-Aldrich
Methanol, ACS reagent, ≥99.8%
Sigma-Aldrich
Methanol, ACS spectrophotometric grade, ≥99.9%
Sigma-Aldrich
Acetic acid, glacial, ReagentPlus®, ≥99%
Sigma-Aldrich
Ammonia solution, 2.0 M in methanol
Sigma-Aldrich
Acetic acid, glacial, ≥99.99% trace metals basis
Sigma-Aldrich
Methanol, HPLC Plus, ≥99.9%
Sigma-Aldrich
Methanol, suitable for HPLC, gradient grade, ≥99.9%
Sigma-Aldrich
Phosphoric acid-16O4 solution, 70 wt. % in D2O, 99.9 atom % 16O
Sigma-Aldrich
Methanol-12C, 99.95 atom % 12C
Sigma-Aldrich
Acetonitrile, anhydrous, 99.8%