Saltar al contenido
Merck
  • Levels and sources of volatile organic compounds including carbonyls in indoor air of homes of Puertollano, the most industrialized city in central Iberian Peninsula. Estimation of health risk.

Levels and sources of volatile organic compounds including carbonyls in indoor air of homes of Puertollano, the most industrialized city in central Iberian Peninsula. Estimation of health risk.

International journal of hygiene and environmental health (2015-05-31)
Florentina Villanueva, Araceli Tapia, Mariano Amo-Salas, Alberto Notario, Beatriz Cabañas, Ernesto Martínez
RESUMEN

Twenty nine organic air pollutants including carbonyl compounds, alkanes, aromatic hydrocarbons and terpenes were measured in the indoor environment of different houses together with the corresponding outdoor measurements in Puertollano, the most industrialized city in central Iberian Peninsula. VOCs were sampled during 8 weeks using Radiello(®) passive samplers, and a questionnaire on potential VOCs sources was filled out by the occupants. The results show that formaldehyde and hexanal was the most abundant VOCs measured in indoor air, with a median concentration of 55.5 and 46.4μgm(-3), respectively followed by butanal (29.1μgm(-3)), acetone (28.4μgm(-3)) and acetaldehyde (21.4μgm(-3)). After carbonyls, n-dodecane (13.1μgm(-3)) and terpenes (α-pinene, 13.4μgm(-3) and limonene, 13.4μgm(-3)) were the compounds with higher median concentrations. The indoor/outdoor (I/O) ratios demonstrated that sources in the indoor environment are prevailing for most of the investigated VOCs especially for limonene, α-pinene, hexanal, formaldehyde, pentanal, acetaldehyde, o-xylene, n-dodecane and acetone with I/O ratio >6. Multiple linear regressions were applied to investigate the indoor VOC determinants and Spearman correlation coefficients were used to establish common sources between VOCs. Finally, the lifetime cancer risk associated to formaldehyde, acetaldehyde and benzene exposure was estimated and they varied from 7.8×10(-5) to 4.1×10(-4) for formaldehyde, from 8.6×10(-6) to 3.5×10(-5) for acetaldehyde and from 2.0×10(-6) to 1.5×10(-5) for benzene. For formaldehyde, the attributed risk in most sampled homes was two orders of magnitude higher than the one (10(-6)) proposed as acceptable by risk management bodies.

MATERIALES
Referencia del producto
Marca
Descripción del producto

Sigma-Aldrich
Tolueno, anhydrous, 99.8%
Sigma-Aldrich
Hexano, anhydrous, 95%
radiello Adsorbentes de cartucho, for sampling BTEX and VOCs (CS2 Desorption), matrix SS net (100 mesh, 5.8 mm diam.), activated with activated charcoal (30-50 mesh), pk of 20
Sigma-Aldrich
Styrene, ReagentPlus®, contains 4-tert-butylcatechol as stabilizer, ≥99%
Sigma-Aldrich
Dodecane, anhydrous, ≥99%
Sigma-Aldrich
1-Butanol, for molecular biology, ≥99%
Sigma-Aldrich
Undecano, ≥99%
Sigma-Aldrich
Heptano, anhydrous, 99%
radiello Triangular Support Plate, pk of 20
Sigma-Aldrich
1,2,4-Trimethylbenzene, 98%
Sigma-Aldrich
1-Butanol, anhydrous, 99.8%
Sigma-Aldrich
Octane, anhydrous, ≥99%
Sigma-Aldrich
Pentane, anhydrous, ≥99%
radiello Diffusive Bodies, white, configured for general use, pk of 20
radiello Adsorbentes de cartucho, for sampling Aldehydes, matrix SS net with 2,4-DNPH coated FLORISIL®, pk of 20
Sigma-Aldrich
p-Xylene, anhydrous, ≥99%
Sigma-Aldrich
Decane, ≥95%
radiello Adsorbentes de cartucho, for sampling Ammonia (NH3), matrix microporous PE impregnated with phosphoric acid, pk of 20
Sigma-Aldrich
Ethylbenzene, anhydrous, 99.8%
Sigma-Aldrich
m-Xylene, anhydrous, ≥99%
Sigma-Aldrich
Disulfuro de carbono, anhydrous, ≥99%
Sigma-Aldrich
1-Butanol, natural, ≥99.5%, FCC, FG
Sigma-Aldrich
Undecano, ≥99%
radiello Diffusive Bodies, yellow, configured for reduced sampling rates, pk of 20
Sigma-Aldrich
o-Xylene, anhydrous, 97%
Sigma-Aldrich
Hexano, JIS special grade, ≥96.0%
Sigma-Aldrich
Decane, anhydrous, ≥99%
radiello Adsorbentes de cartucho, for sampling BTEX and VOCs (thermal desorption), matrix SS net (3 x 8 μm, 4.8 mm diam.), Carbograph, pk of 20
radiello Diffusive Bodies, blue, configured for sampling light sensitive compounds, pk of 20
Sigma-Aldrich
Tolueno, SAJ first grade, ≥99.0%