Molar uprighting by a nickel-titanium spring based on a setup model.

Molar uprighting by a nickel-titanium spring based on a setup model.

American journal of orthodontics and dentofacial orthopedics : official publication of the American Association of Orthodontists, its constituent societies, and the American Board of Orthodontics (2014-07-01)

MoonHee Kim, Minji Kim, Youn-Sic Chun

PMID24975006

ABSTRACT

Molar uprighting is an important adjunctive treatment in orthodontics: repositioning the tilted molar eliminates the potentially pathologic condition and simplifies the ultimate restorative procedure. Although various methods for molar uprighting have been applied successfully, they still have some limitations and disadvantages in tooth movement. This article reports on a new clinical technique for molar uprighting with nickel-titanium springs based on a setup model. Two patients treated with this system are shown.

MATERIALS

Product Number

Brand

Product Description

IRMM531B

Titanium, IRMM^®, certified reference material, 0.5 mm foil

267074

Sigma-Aldrich

Nickel, rod, diam. 6.35 mm, ≥99.99% trace metals basis

348791

Sigma-Aldrich

Titanium, foil, thickness 0.127 mm, 99.7% trace metals basis

266035

Sigma-Aldrich

Titanium, wire, diam. 1.0 mm, 99.99% trace metals basis

IRMM531C

Titanium, IRMM^®, certified reference material, 0.5 mm wire

369489

Sigma-Aldrich

Titanium, foil, thickness 2.0 mm, 99.7% trace metals basis

357553

Sigma-Aldrich

Nickel, foil, thickness 0.5 mm, 99.98% trace metals basis

357626

Sigma-Aldrich

Nickel, wire, diam. 0.5 mm, ≥99.9% trace metals basis

577995

Sigma-Aldrich

Nickel, nanopowder, <100 nm avg. part. size, ≥99% trace metals basis

267902

Sigma-Aldrich

Titanium, wire, diam. 0.81 mm, 99.7% trace metals basis

460400

Sigma-Aldrich

Titanium, wire, diam. 0.25 mm, 99.7% trace metals basis

305812

Sigma-Aldrich

Titanium, 5-10 mm, ≥99.99% trace metals basis (purity exclusive of Na and K content)

348848

Sigma-Aldrich

Titanium, foil, thickness 0.025 mm, 99.98% trace metals basis

357588

Sigma-Aldrich

Nickel, foil, thickness 0.1 mm, 99.98% trace metals basis

GF25500079

Nickel, foil, 2m coil, thickness 0.5mm, annealed, 99.98%

GF92543564

Nickel, foil, 150x300mm, thickness 0.25mm, annealed, 99.98%

GF37939506

Nickel, mesh, 30x30mm, nominal aperture 0.34mm, thickness 0.025mm, wire diameter 0.041mm, 70 wires/inch, open area 80%, electro-formed mesh, 99.9%

GF65336700

Titanium, rod, 200mm, diameter 2mm, annealed, 99.6+%

GF76772391

Titanium, rod, 100mm, diameter 10mm, annealed, 99.6+%

GF87716997

Titanium, rod, 100mm, diameter 16mm, as drawn, 99.99+%

GF06082286

Titanium, microfoil, disks, 10mm, thinness 1.0μm, specific density 429μg/cm², permanent mylar 3.5μm support, 99.6+%

GF32919824

Nickel, foil, 50x50mm, thickness 0.25mm, as rolled, 99.99+%

GF15707729

Nickel, foil, not light tested, 300x300mm, thickness 0.0125mm, annealed, 99%

GF03916290

Titanium, rod, 490mm, diameter 2mm, annealed, 99.6+%

GF09874424

Nickel, wire reel, 10m, diameter 0.25mm, hard, 99.98%

GF02127068

Nickel, foil, 10mm disks, thickness 0.0075mm, 99.9%

GF56028720

Nickel, foil, 0.5m coil, thickness 0.038mm, 99.9%

GF60017510

Nickel, foil, 0.2m coil, thickness 0.004mm, hard, 99%

GF68670366

Titanium, tube, 1220mm, outside diameter 2.03mm, inside diameter 1.55mm, wall thickness 0.24mm, annealed, 99.6+%

GF82517722

Titanium, tube, 1000mm, outside diameter 6.35mm, inside diameter 4.57mm, wall thickness 0.89mm, annealed, 99.6+%