Skip to Content
Merck
  • Identification of Fe-polycarboxylic complexes by electrospray ionization mass spectrometry and reduction of interferences by ion chromatography/inductively coupled plasma mass spectrometry with an octopole reaction system.

Identification of Fe-polycarboxylic complexes by electrospray ionization mass spectrometry and reduction of interferences by ion chromatography/inductively coupled plasma mass spectrometry with an octopole reaction system.

Rapid communications in mass spectrometry : RCM (2010-09-28)
Zu-Liang Chen, Xiao-Ying Jin, Li Gan
ABSTRACT

Stable complexes are required during the ion chromatographic (IC) separation of Fe-polycarboxylic acid complexes. Electrospray ionization mass spectrometry (ESI-MS) was used to identify 1:1 stoichiometric complexes of Fe[HEDTA], Fe[EDTA](1-) and Fe[DTPA](2-), and the spectra showed that these Fe complexes were stable in solution. Furthermore, inductively coupled plasma mass spectrometry (ICP-MS) using an octopole reaction system (ORS) reduced polyatomic ion (40)Ar(16)O(+) interference in the detection of (56)Fe via the addition of either H(2) or He to the ORS, with He at a flow rate 3.5 mL min(-1) being the optimum collision gas. Finally, IC/ICP-MS was used for the separation and detection of Fe complexes with an eluent containing 30 mM (NH(4))(2)HPO(4) at pH 8.0, but only Fe[HEDTA], Fe[EDTA](1-) and Fe[DTPA](2-) were observed within 10 min with reasonable resolution. Detection limits in the range of 10-13 µg L(-1) were achieved using He as the collision gas. The proposed method was used for the determination of Fe species in soil solutions.

MATERIALS
Product Number
Brand
Product Description

Supelco
Ammonium phosphate monobasic, analytical standard, for nitrogen determination according to Kjeldahl method, ≥99.5%
Sigma-Aldrich
Ammonium dihydrogenphosphate, 99.999% trace metals basis
Sigma-Aldrich
Ammonium phosphate dibasic, BioUltra, ≥99.0% (T)
Sigma-Aldrich
Ammonium phosphate dibasic, ≥99.99% trace metals basis
Sigma-Aldrich
Ammonium phosphate monobasic, BioUltra, ≥99.5% (T)
Sigma-Aldrich
Ammonium phosphate monobasic, suitable for plant cell culture
Sigma-Aldrich
Ammonium phosphate dibasic, ACS reagent, ≥98%
Sigma-Aldrich
Ammonium phosphate monobasic, ReagentPlus®, ≥98.5%
Sigma-Aldrich
Ammonium phosphate monobasic, suitable for HPLC, ≥99%
Sigma-Aldrich
Ammonium phosphate dibasic, AR, ≥98%
Sigma-Aldrich
Ammonium phosphate monobasic, AR, ≥99%
Sigma-Aldrich
Ammonium phosphate monobasic, ACS reagent, ≥98%
Sigma-Aldrich
Ammonium phosphate dibasic, reagent grade, ≥98.0%
Sigma-Aldrich
Ammonium phosphate monobasic, ≥99.99% trace metals basis
Sigma-Aldrich
Ammonium phosphate dibasic, puriss. p.a., ACS reagent, reag. Ph. Eur., ≥98% (alkalimetric)