Saltar al contenido
Merck

Amphiphilic Pickering Emulsifiers Based on Mushroom-Type Janus Particles.

Langmuir : the ACS journal of surfaces and colloids (2015-07-15)
E Passas-Lagos, F Schüth
RESUMEN

Iron-based mushroom-type Janus particles consisting of a poly(sytrene-co-divinylbenzene) and a silica moiety both with controllable morphologies were successfully synthesized on the gram scale and investigated as surfactants for Pickering emulsions. Two oil-water model systems, namely toluene-water and vegetable oil-water, were stabilized, giving mainly water-in-oil (w/o) emulsions. By varying several parameters, including Janus particle morphologies and the oil-water ratio, fine-tuning of the emulsion systems was possible; it was even possible to invert the continuous phase to an oil-in-water (o/w) system. Furthermore, the emulsions were stable against coalescence and sedimentation and could be easily separated by centrifugation or a strong magnet. The synthesized mushroom-type Janus particles are suitable for creating Pickering emulsions and can be used as building blocks for creating nanostructures with tailored properties for specific applications.

MATERIALES
Referencia del producto
Marca
Descripción del producto

Sigma-Aldrich
Persulfato de amonio, for molecular biology, suitable for electrophoresis, ≥98%
Sigma-Aldrich
Divinylbenzene, technical grade, 80%
Sigma-Aldrich
Tolueno, anhydrous, 99.8%
Sigma-Aldrich
L-Lisina, ≥98% (TLC)
Sigma-Aldrich
Alcohol isopropílico, ≥99.7%, FCC, FG
Sigma-Aldrich
Glycidyl methacrylate, ≥97.0% (GC)
Sigma-Aldrich
2-Propanol, for molecular biology, BioReagent, ≥99.5%
Sigma-Aldrich
2-Propanol, BioUltra, for molecular biology, ≥99.5% (GC)
Sigma-Aldrich
2-Propanol, anhydrous, 99.5%
Sigma-Aldrich
Iron(II,III) oxide, powder, <5 μm, 95%
Sigma-Aldrich
2-Propanol, electronic grade, 99.999% trace metals basis
Sigma-Aldrich
Rhodamine 6G, Dye content ~95 %
Sigma-Aldrich
Glycidyl methacrylate, 97%, contains 100 ppm monomethyl ether hydroquinone as inhibitor
Sigma-Aldrich
L-Lisina, crystallized, ≥98.0% (NT)
Sigma-Aldrich
Persulfato de amonio, BioUltra, for molecular biology, ≥98.0% (RT)
Sigma-Aldrich
Rhodamine 6G, Dye content 99 %
Sigma-Aldrich
Divinylbenzene, technical grade, 55%
Sigma-Aldrich
Iron(II,III) oxide, 99.99% trace metals basis
Sigma-Aldrich
Styrene, ReagentPlus®, contains 4-tert-butylcatechol as stabilizer, ≥99%
Sigma-Aldrich
Iron oxide(II,III), magnetic nanoparticles solution, 10 nm avg. part. size, 5 mg/mL in toluene
Sigma-Aldrich
Rhodamine 6G, suitable for fluorescence, BioReagent
Sigma-Aldrich
Iron oxide(II,III), magnetic nanoparticles solution, 10 nm avg. part. size, 5 mg/mL in H2O
Sigma-Aldrich
Iron oxide(II,III), magnetic nanoparticles solution, 30 nm avg. part. size (TEM), PEG functionalized, 1 mg/mL Fe in H2O, dispersion
Sigma-Aldrich
Iron oxide(II,III), magnetic nanoparticles solution, 5 nm avg. part. size, 5 mg/mL in H2O
Sigma-Aldrich
Iron oxide(II,III), magnetic nanoparticles solution, 10 nm avg. part. size (TEM), carboxylic acid functionalized, 5 mg/mL Fe in H2O, dispersion
Sigma-Aldrich
Iron oxide(II,III), magnetic nanoparticles solution, 30 nm avg. part. size (TEM), amine functionalized, 1 mg/mL Fe in H2O, dispersion
Sigma-Aldrich
Persulfato de amonio, BioXtra, ≥98.0%
Sigma-Aldrich
Iron oxide(II,III), magnetic nanoparticles solution, 20 nm avg. part. size, 5 mg/mL in H2O
Sigma-Aldrich
Iron oxide(II,III), magnetic nanoparticles solution, 5 nm avg. part. size, 5 mg/mL in toluene
Sigma-Aldrich
Iron oxide(II,III), magnetic nanoparticles solution, 20 nm avg. part. size, 5 mg/mL in toluene