Saltar al contenido
Merck
  • Direct doping analysis of beta-blocker drugs from urinary samples by on-line molecularly imprinted solid-phase extraction coupled to liquid chromatography/mass spectrometry.

Direct doping analysis of beta-blocker drugs from urinary samples by on-line molecularly imprinted solid-phase extraction coupled to liquid chromatography/mass spectrometry.

The Analyst (2015-02-14)
Mariane Gonçalves Santos, Isabela Maria Campos Tavares, Vanessa Bergamin Boralli, Eduardo Costa Figueiredo
RESUMEN

The use of beta-blockers to enhance performance in some sports is forbidden. Based on this regulation, there is a demand for dynamic analytical procedures for analyzing these compounds quickly and without manual sample preparation. Therefore, the use of a molecularly imprinted polymer (MIP) in a multidimensional liquid chromatographic system coupled to a mass spectrometer provides a good alternative for improving the selectivity and practicality of the beta-blocker analyses, as described in this paper. A water-compatible MIP for oxprenolol was synthesized by the precipitation method, using methacrylic acid as a functional monomer and 2-hydroxyethyl methacrylate and glycerol dimethacrylate as hydrophilic monomers. A column filled with MIP was coupled to an LC-MS/MS instrument under the multidimensional configuration, with 10.0 mmol L(-1) ammonium formate buffer (pH 5.0) as the loading and reconditioning mobile phase and a 0.01% formic acid aqueous solution-methanol (30 : 70 v : v) as the elution mobile phase. The system was used for on-line extraction and quantization of oxprenolol (from 1.0 to 75.0 μg L(-1)), atenolol, propranolol, nadolol, pindolol, labetalol and metoprolol (all from 3.0 to 50 μg L(-1)) simultaneously, from urine samples. The correlation coefficient was higher than 0.99 for all the analytes. Suitable precision and accuracy were obtained.

MATERIALES
Referencia del producto
Marca
Descripción del producto

Sigma-Aldrich
Acetonitrilo, suitable for HPLC, gradient grade, ≥99.9%
Sigma-Aldrich
Metanol, suitable for HPLC, ≥99.9%
Sigma-Aldrich
Metanol, ACS reagent, ≥99.8%
Sigma-Aldrich
Hidróxido de amonio solution, ACS reagent, 28.0-30.0% NH3 basis
Sigma-Aldrich
Ácido acético, glacial, ACS reagent, ≥99.7%
Sigma-Aldrich
Acetonitrilo, HPLC Plus, ≥99.9%
Sigma-Aldrich
Ácido acético, glacial, ReagentPlus®, ≥99%
Sigma-Aldrich
Metanol, suitable for HPLC, gradient grade, ≥99.9%
Sigma-Aldrich
Ácido fórmico, reagent grade, ≥95%
Sigma-Aldrich
Metanol, HPLC Plus, ≥99.9%
Sigma-Aldrich
Ácido fórmico, ACS reagent, ≥96%
Sigma-Aldrich
Ácido fórmico, puriss. p.a., ACS reagent, reag. Ph. Eur., ≥98%
Sigma-Aldrich
Acetonitrilo, ACS reagent, ≥99.5%
Sigma-Aldrich
Hidróxido de amonio solution, 28% NH3 in H2O, ≥99.99% trace metals basis
Sigma-Aldrich
Formato de amonio, reagent grade, 97%
Sigma-Aldrich
Acetonitrilo, suitable for HPLC, gradient grade, ≥99.9%
Sigma-Aldrich
Ácido acético, glacial, ≥99.99% trace metals basis
Sigma-Aldrich
Metanol, suitable for HPLC, gradient grade, suitable as ACS-grade LC reagent, ≥99.9%
Sigma-Aldrich
Ácido acético solution, suitable for HPLC
Sigma-Aldrich
Metanol, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., ≥99.8% (GC)
Sigma-Aldrich
Ácido acético, glacial, puriss., meets analytical specification of Ph. Eur., BP, USP, FCC, 99.8-100.5%
Sigma-Aldrich
Cloruro de amonio, ReagentPlus®, ≥99.5%
Sigma-Aldrich
Acetonitrilo, anhydrous, 99.8%
Sigma-Aldrich
Ácido fórmico, puriss., meets analytical specifications of DAC, FCC, 98.0-100%
Sigma-Aldrich
Metanol, Laboratory Reagent, ≥99.6%
Sigma-Aldrich
Hidróxido de amonio solution, puriss., 30-33% NH3 in H2O
Sigma-Aldrich
Formato de amonio, ≥99.995% trace metals basis
Sigma-Aldrich
Ácido acético, glacial, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., ≥99.8%
Sigma-Aldrich
Cloruro de amonio, for molecular biology, suitable for cell culture, ≥99.5%
Sigma-Aldrich
Ácido fórmico, ACS reagent, ≥88%