Saltar al contenido
Merck

Combined effect of pH and high temperature on the stability and antioxidant capacity of two anthocyanins in aqueous solution.

Food chemistry (2014-06-11)
Xiaonan Sui, Xin Dong, Weibiao Zhou
RESUMEN

The stability of two cyanidin-based anthocyanins from black rice in an aqueous system containing them with a pH range of 2.2-6.0 was investigated at temperatures ranging from 100 to 165°C. Within these pH and temperature ranges, the stability of the two anthocyanins was found to decrease gradually with increasing pH. The lowest (8.99×10(-4)s(-1)) and highest (0.120s(-1)) degradation rate constants for cyanidin-3-glucoside were obtained at pH 2.2 & 100°C and pH 6.0 & 165°C, respectively, whereas those for cyanidin-3-rutinoside were 5.33×10(-4)s(-1) at pH 2.2 & 100°C and 7.39×10(-2)s(-1) at pH 5.0 & 165°C, respectively. Antioxidant capacity analysis was conducted on thermally processed anthocyanin solutions to further evaluate the effects of pH and thermal treatment on the anthocyanins. The total antioxidant capacity of samples after thermal treatments under various pHs was found to remain at a similar level.

MATERIALES
Referencia del producto
Marca
Descripción del producto

Sigma-Aldrich
Ácido trifluoroacético, ReagentPlus®, 99%
Sigma-Aldrich
Ácido trifluoroacético, suitable for HPLC, ≥99.0%
Sigma-Aldrich
Cloruro de potasio, ACS reagent, 99.0-100.5%
Sigma-Aldrich
Fosfato de sodio dibasic, ACS reagent, ≥99.0%
Sigma-Aldrich
Ácido fórmico, reagent grade, ≥95%
Sigma-Aldrich
Ácido fórmico, ACS reagent, ≥96%
Sigma-Aldrich
Sodium acetate, anhydrous, ReagentPlus®, ≥99.0%
Sigma-Aldrich
Ácido fórmico, puriss. p.a., ACS reagent, reag. Ph. Eur., ≥98%
Sigma-Aldrich
Ácido trifluoroacético, puriss. p.a., suitable for HPLC, ≥99.0% (GC)
Sigma-Aldrich
2,2-difenil-1-picrilhidrazil
Sigma-Aldrich
Persulfato de potasio, ACS reagent, ≥99.0%
Sigma-Aldrich
Fosfato de sodio dibasic, puriss. p.a., ACS reagent, anhydrous, ≥99.0% (T)
Sigma-Aldrich
Sodium acetate, ACS reagent, ≥99.0%
Sigma-Aldrich
Sodium acetate, puriss. p.a., ACS reagent, reag. Ph. Eur., anhydrous
Sigma-Aldrich
Cloruro de potasio, puriss., meets analytical specification of Ph. Eur., BP, USP, FCC, E508, 99-100.5% (AT), ≤0.0001% Al
Sigma-Aldrich
Cloruro de potasio, for molecular biology, ≥99.0%
Sigma-Aldrich
Ácido cítrico, meets analytical specification of Ph. Eur., BP, USP, E330, anhydrous, 99.5-100.5% (based on anhydrous substance)
Sigma-Aldrich
Cloruro de potasio, powder, BioReagent, suitable for cell culture, suitable for insect cell culture, ≥99.0%
Sigma-Aldrich
Ácido fórmico, puriss., meets analytical specifications of DAC, FCC, 98.0-100%
Sigma-Aldrich
Cloruro de potasio, ReagentPlus®, ≥99.0%
Sigma-Aldrich
Ácido fórmico, ACS reagent, ≥88%
Sigma-Aldrich
Fosfato de sodio dibasic, puriss., meets analytical specification of Ph. Eur., BP, USP, FCC, E 339, anhydrous, 98-100.5% (calc. to the dried substance)
Sigma-Aldrich
Ácido trifluoroacético, ≥99%, for protein sequencing
Sigma-Aldrich
Cloruro de potasio solution, BioUltra, for molecular biology, ~1 M in H2O
Sigma-Aldrich
Fosfato de sodio dibasic, for molecular biology, ≥98.5% (titration)
Sigma-Aldrich
Fosfato de sodio dibasic, BioReagent, suitable for cell culture, suitable for insect cell culture, ≥99.0%
Sigma-Aldrich
Cloruro de potasio, anhydrous, free-flowing, Redi-Dri, ACS reagent, ≥99%
Sigma-Aldrich
Sodium phosphate dibasic solution, BioUltra, 0.5 M in H2O
Sigma-Aldrich
Cloruro de potasio, puriss. p.a., ≥99.5% (AT)
Sigma-Aldrich
Cloruro de potasio, BioUltra, for molecular biology, ≥99.5% (AT)