Saltar al contenido
Merck
  • Integrative refolding and purification of histidine-tagged protein by like-charge facilitated refolding and metal-chelate affinity adsorption.

Integrative refolding and purification of histidine-tagged protein by like-charge facilitated refolding and metal-chelate affinity adsorption.

Journal of chromatography. A (2014-04-29)
Hu Liu, Wen-Jie Du, Xiao-Yan Dong, Yan Sun
RESUMEN

This work proposed an integrative method of protein refolding and purification by like-charged resin facilitated refolding and metal-chelate affinity adsorption. Hexahistidine-tagged enhanced green fluorescence protein (EGFP) was overexpressed in Escherichia coli as inclusion bodies (IBs), and then the protein was refolded and purified from urea-solubilized IBs by this method. A metal-chelating resin was fabricated by coupling iminodiacetic acid (IDA) to agarose gel (Sepharose FF). The anionic resin was used to facilitate the refolding of like-charged EGFP from IBs. After refolding, nickel ions were introduced for the affinity purification of the target protein by metal-chelating adsorption. It was found that the resin was effective in facilitating EGFP refolding. For 0.1mg/mL EGFP IBs refolding, the fluorescence recovery (FR) by direct dilution was only 64%; addition of only 0.05 g/mL resin increased the FR to over 90%. Moreover, the FR increased with increasing resin concentration. Owning to the shielding effect of the oppositely charged impurities embedded in IBs on the surface charges of the IDA resin, more resin particles were required to exert an aggregation inhibition effect in the IBs protein refolding. Additionally, compared with direct-dilution refolding, inclusion of like-charged resins not only offered an enhanced FR of EGFP, but also bound some opposite-charged contaminant proteins, leading to a preliminary purification effect. Afterwards, the refolded EGFP was recovered by metal-chelating adsorption at an FR of 85% and purity of 93%. This work has thus extended the like-charge facilitated protein refolding strategy to the integrative protein refolding and purification.

MATERIALES
Referencia del producto
Marca
Descripción del producto

Sigma-Aldrich
Agarosa, BioReagent, for molecular biology, low EEO
Sigma-Aldrich
L-Histidina, suitable for cell culture, meets EP, USP testing specifications, from non-animal source
Sigma-Aldrich
Copper, powder, 99.999% trace metals basis
Sigma-Aldrich
Iminodiacetic acid, 98%
SAFC
L-Histidina
Sigma-Aldrich
Copper, foil, thickness 0.25 mm, 99.98% trace metals basis
Sigma-Aldrich
L-Histidina, BioUltra, ≥99.5% (NT)
Sigma-Aldrich
Raney®-Nickel, W.R. Grace and Co. Raney® 2800, slurry, in H2O, active catalyst
Sigma-Aldrich
Copper, powder, <425 μm, 99.5% trace metals basis
Sigma-Aldrich
Nickel, nanopowder, <100 nm avg. part. size, ≥99% trace metals basis
Sigma-Aldrich
Raney®-Nickel, W.R. Grace and Co. Raney® 2400, slurry, in H2O, active catalyst
Sigma-Aldrich
Nickel, powder, <50 μm, 99.7% trace metals basis
Sigma-Aldrich
Copper, powder, <75 μm, 99%
Sigma-Aldrich
L-Histidina, ReagentPlus®, ≥99% (TLC)
Sigma-Aldrich
Agarosa, High EEO, for molecular biology
Sigma-Aldrich
Copper, nanopowder, 40-60 nm particle size (SAXS), ≥99.5% trace metals basis
Sigma-Aldrich
Nickel, powder, <150 μm, 99.99% trace metals basis
Sigma-Aldrich
Copper, powder (spheroidal), 10-25 μm, 98%
Sigma-Aldrich
Copper, wire, diam. 0.25 mm, 99.999% trace metals basis
Sigma-Aldrich
Copper, nanopowder, 60-80 nm particle size (SAXS), ≥99.5% trace metals basis
Sigma-Aldrich
Copper, foil, thickness 0.025 mm, 99.98% trace metals basis
Sigma-Aldrich
Nickel, foil, thickness 0.125 mm, ≥99.9%
Sigma-Aldrich
Copper, turnings, purum p.a., ≥99.0%
Sigma-Aldrich
Copper, foil, ≥99.8% (complexometric)
Sigma-Aldrich
Copper, powder (dendritic), <45 μm, 99.7% trace metals basis
Sigma-Aldrich
Raney®-Nickel, W.R. Grace and Co. Raney® 4200, slurry, in H2O, active catalyst
Sigma-Aldrich
Nickel, wire, diam. 0.25 mm, ≥99.9%
Sigma-Aldrich
Agarosa, Special High EEO
Sigma-Aldrich
Nickel, powder, <1 μm, 99.8% trace metals basis
Sigma-Aldrich
Copper, foil, thickness 0.5 mm, 99.98% trace metals basis