Skip to Content
Merck
  • Levels of 7-oxocholesterol in cerebrospinal fluid are more than one thousand times lower than reported in multiple sclerosis.

Levels of 7-oxocholesterol in cerebrospinal fluid are more than one thousand times lower than reported in multiple sclerosis.

Journal of lipid research (2004-12-04)
Valerio Leoni, Dieter Lütjohann, Thomas Masterman
ABSTRACT

In a recent publication [Diestel, A., O. Aktas, D. Hackel, I. Hake, S. Meier, C. S. Raine, R. Nitsch, F. Zipp, and O. Ullrich. 2003. Activation of microglial poly (ADP-ribose)-polymerase-1 by cholesterol breakdown products during neuroinflammation: a link between demyelination and neuronal damage. J. Exp. Med. 198: 1729-1740], extremely high levels of 7-oxocholesterol were reported in cerebrospinal fluid (CSF) of 11 patients with multiple sclerosis (MS) [7.4 +/- 0.3 mg/l (mean +/- SEM)]. The corresponding level of 12 subjects with other kinds of neurological diseases was reported to be 0.5 +/- 0.1 mg/l. Such high levels of 7-oxocholesterol were found to cause neuronal damage of living brain tissues. Using a highly accurate method for an assay of 7-oxocholesterol based on isotope dilution-mass spectrometry and anaerobic conditions during workup, we found that the level of 7-oxocholesterol in CSF from 29 Swedish patients with MS was only 1.2 microg/l (median, ranging from 0.4 to 4.6 microg/l), less than 1/1,000 th of the previously reported level. The level of 7-oxocholesterol in CSF from 24 Swedish control patients was 0.9 microg/l (0.3-2.3 microg/l), slightly but significantly lower than the CSF level in MS patients (P=0.002). In vitro-induced lipid peroxidation of the endogenous cholesterol in CSF increased the level of 7-oxygenated cholesterol metabolites, particularly 7-oxocholesterol, up to approximately 0.3 mg/l. These results are discussed in relation to the fact that 7-oxygenated steroids are easily artificially formed by autoxidation of cholesterol during workup procedures and analysis of sterols and oxysterols from biological samples.

MATERIALS
Product Number
Brand
Product Description

Supelco
L-Cysteine, certified reference material, TraceCERT®, Manufactured by: Sigma-Aldrich Production GmbH, Switzerland
Sigma-Aldrich
Calcium, dendritic pieces, purified by distillation, 99.9% trace metals basis
Sigma-Aldrich
Aluminum, foil, thickness 0.13 mm, ≥99.99% trace metals basis
Sigma-Aldrich
Aluminum, pellets, 3-12 mm, 99.99% trace metals basis
Sigma-Aldrich
Aluminum, foil, thickness 0.25 mm, 99.999% trace metals basis
Sigma-Aldrich
Copper, powder (dendritic), <45 μm, 99.7% trace metals basis
Sigma-Aldrich
Copper, foil, thickness 0.25 mm, 99.98% trace metals basis
Sigma-Aldrich
Titanium, sponge, 1-20 mm, 99.5% trace metals basis
Sigma-Aldrich
Zinc, mossy, ≥99%
Sigma-Aldrich
Silicon, pieces, 99.95% trace metals basis
Sigma-Aldrich
Silicon, powder, −325 mesh, 99% trace metals basis
Sigma-Aldrich
Nickel, wire, diam. 0.25 mm, ≥99.9%
Sigma-Aldrich
Bismuth, pieces, 1-12 mm, 99.999% trace metals basis
Millipore
Bifido Selective Supplement B, suitable for microbiology
Sigma-Aldrich
Aluminum, foil, thickness 1.0 mm, 99.999% trace metals basis
Sigma-Aldrich
Titanium, evaporation slug, diam. × L 6.3 mm × 6.3 mm, ≥99.99% trace metals basis
Sigma-Aldrich
Aluminum, foil, thickness 0.45-0.55 mm, 99.999% trace metals basis
Sigma-Aldrich
L-Cysteine, 97%
Sigma-Aldrich
Copper, powder, <425 μm, 99.5% trace metals basis
Sigma-Aldrich
Nickel, powder, <150 μm, 99.99% trace metals basis
Copper (O), BCR®, certified reference material, rod
Sigma-Aldrich
Tin, wire, diam. 0.5 mm, 99.999% trace metals basis
Sigma-Aldrich
Bismuth, powder, −100 mesh, 99% trace metals basis
Sigma-Aldrich
Tungsten, wire, diam. 1.0 mm, 99.99% trace metals basis
Sigma-Aldrich
Titanium, foil, thickness 0.25 mm, 99.7% trace metals basis
Sigma-Aldrich
Copper, ACS reagent, granular, 10-40 mesh, ≥99.90%
Sigma-Aldrich
Bismuth, beads, 1-5 mm, 99.999% trace metals basis
Sigma-Aldrich
Tungsten, wire, diam. 0.5 mm, ≥99.9% trace metals basis
Sigma-Aldrich
Zinc, wire, diam. 1.0 mm, 99.995% trace metals basis
Sigma-Aldrich
Titanium, foil, thickness 0.127 mm, ≥99.99% trace metals basis