Characterization and humidity sensing properties of the sensor based on Na2Ti3O7 nanotubes.

Characterization and humidity sensing properties of the sensor based on Na2Ti3O7 nanotubes.

Journal of nanoscience and nanotechnology (2014-04-18)

Yupeng Zhang, Jian Wu, Ying Zhang, Wenbin Guo, Shenping Ruan

ABSTRACT

Na2Ti3O7 nanotubes was synthesized by a hydrothermal method, and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Then the material was coated on Al2O3 ceramic substrate to fabricate humidity sensors using Ag-Pd as interdigitated electrodes. The sensor shows high humidity sensitivity and quick response-recovery time. The impedance changes about five orders of magnitude within humidity range from 11% to 95% relative humidity (RH). At the frequency of 100 Hz, the response time is 2 s and recovery time is 4 s, and the maximum hysteresis is less than 3% RH. Moreover, complex impedance property at different RH was investigated to study sensing mechanism. The results indicate the potential applications of Na2Ti3O7 nanotubes for fabricating high-performance humidity sensors.

MATERIALS

Product Number

Brand

Product Description

00612

Supelco

Water, suitable for ion chromatography

195294

Sigma-Aldrich

Water, deuterium-depleted, ≤1 ppm (Deuterium oxide)

95283

Supelco

Water, for HPCE, for luminescence, suitable for UV/Vis spectroscopy

95280

Sigma-Aldrich

Water, tested according to Ph. Eur.

95289

Sigma-Aldrich

Water, for cell biology, sterile ultrafiltered

95284

Sigma-Aldrich

Water, for molecular biology, sterile filtered

W1754

Sigma-Aldrich

Water, PCR Reagent

2107

Sigma-Aldrich

E-Toxate^™ Water, endotoxin, free

W1503

Sigma-Aldrich

Water, for embryo transfer, sterile-filtered, BioXtra, suitable for mouse embryo cell culture

W3513

Sigma-Aldrich

Water, BioPerformance Certified

12156

Supelco

Density Standard 998 kg/m³, H&D Fitzgerald Ltd. Quality

14211

Supelco

Water, ACS reagent, for ultratrace analysis

GF16031843

Titanium, mesh, 100x100mm, nominal aperture 0.19mm, wire diameter 0.23mm, 60x60 wires/inch, open area 20%, twill weave

GF13959939

Titanium, microfoil, disks, 10mm, thinness 0.5μm, specific density 225.4μg/cm², permanent mylar 3.5μm support, 99.6+%

GF76772391

Titanium, rod, 100mm, diameter 10mm, annealed, 99.6+%

GF66991179

Titanium, rod, 100mm, diameter 2mm, as drawn, 99.99+%

GF61228403

Titanium, wire reel, 50m, diameter 0.75mm, as drawn, 99.6+%

GF26694771

Titanium, wire reel, 20m, diameter 0.125mm, annealed, 99.6+%

GF82635138

Titanium, tube, 500mm, outside diameter 6.35mm, inside diameter 5.53mm, wall thickness 0.41mm, annealed, 99.6+%

GF56868766

Titanium, wire reel, 25m, diameter 1.0mm, annealed, 99.6+%

GF62977540

Titanium, tube, 200mm, outside diameter 2.03mm, inside diameter 1.63mm, wall thickness 0.2mm, annealed, 99.6+%

GF13915447

Titanium, tube, 100mm, outside diameter 2.03mm, inside diameter 1.55mm, wall thickness 0.24mm, annealed, 99.6+%

GF71020235

Titanium, wire reel, 0.5m, diameter 1.0mm, as drawn, 99.6+%

GF35061083

Titanium, tube, 200mm, outside diameter 6.35mm, inside diameter 5.53mm, wall thickness 0.41mm, annealed, 99.6+%

GF90688449

Titanium, wire reel, 5m, diameter 0.75mm, as drawn, 99.6+%

GF25479333

Titanium, wire reel, 0.5m, diameter 0.25mm, as drawn, 99.99+%

GF55775975

Titanium, wire reel, 25m, diameter 0.25mm, as drawn, 99.6+%

GF54883581

Titanium, rod, 1000mm, diameter 3.0mm, annealed, 99.6+%

GF28411703

Titanium, tube, 100mm, outside diameter 10.3mm, inside diameter 8.7mm, wall thickness 0.8mm, annealed, 99.6+%

GF49264713

Titanium, tube, 200mm, outside diameter 1.6mm, inside diameter 1.2mm, wall thickness 0.2mm, hard, 99.6+%