推荐产品
一般說明
Designed to dissociate and remove antibodies from membrane-bound proteins without destroying antigenic binding capacity. Recommended for stripping chemiluminescent or radioisotopic signals from blots. Not recommended for stripping color-producing Western blots. Supplied as a 5X solution sufficient for stripping 25-30 standard blots.
This Western-Re-Probe Reagent is validated for use in Immunoblotting.
Western-Re-Probe Reagent is specifically formulated to dissociate and remove antibodies from the membrane bound protein without destroying the antigenic binding affinity. The removal of antibodies also removes corresponding chemiluminescence or radioactive signals from the blots. Stripped blots can be probed with new probes.
應用
Immunoblotting (see comments)
成分
5X Re-Probe solution (125 ml)
警告
Toxicity: Standard Handling (A)
外觀
Supplied as a 5X solution.
其他說明
Sufficient volume to strip 25-30 standard blots.
ADVANTAGES
-Immunoblotting analyzed repeatedly with multiple probes
-Saving on hard-to-get reagents and samples
-Correction and re-analysis of unsatisfactory Western Blots
-Saving time spent in gel re-running and transfer processes
PROTOCOL
1- Keep the membrane wet in an appropriate buffer after each probing procedure. Prepare 20-25 ml solution of 1X Western-Re-Probe in water.
2- Incubate the membrane in 1X Western-Re-Probe buffer for 30 min at room temperature (RT) with shaking.
3- Wash the membrane three times in PBST or TBST buffer containing 0.1% Tween-20 detergent. Use a large volume of washing buffer in a tray for the washing step. Each wash cycle involves agitating the membrane 5 min in the washing buffer.
4- Block the membrane and perform immunodetection.
Western-Re-Probe Reagent can be used for stripping and re-probing membranes 2-3 times. Some loss of signal may be noticed after second cycle of stripping and re-probing.
PROTOCOL SUMMARY
1. Incubate membrane in 1X Western-Re-Probe (30 min at RT) with shaking
2. Wash the membrane 3 times in PBST or TBST buffer
3. Block membrane and perform immunodetection
ADVANTAGES
-Immunoblotting analyzed repeatedly with multiple probes
-Saving on hard-to-get reagents and samples
-Correction and re-analysis of unsatisfactory Western Blots
-Saving time spent in gel re-running and transfer processes
PROTOCOL
1- Keep the membrane wet in an appropriate buffer after each probing procedure. Prepare 20-25 ml solution of 1X Western-Re-Probe in water.
2- Incubate the membrane in 1X Western-Re-Probe buffer for 30 min at room temperature (RT) with shaking.
3- Wash the membrane three times in PBST or TBST buffer containing 0.1% Tween-20 detergent. Use a large volume of washing buffer in a tray for the washing step. Each wash cycle involves agitating the membrane 5 min in the washing buffer.
4- Block the membrane and perform immunodetection.
Western-Re-Probe Reagent can be used for stripping and re-probing membranes 2-3 times. Some loss of signal may be noticed after second cycle of stripping and re-probing.
PROTOCOL SUMMARY
1. Incubate membrane in 1X Western-Re-Probe (30 min at RT) with shaking
2. Wash the membrane 3 times in PBST or TBST buffer
3. Block membrane and perform immunodetection
法律資訊
CALBIOCHEM is a registered trademark of Merck KGaA, Darmstadt, Germany
儲存類別代碼
12 - Non Combustible Liquids
水污染物質分類（WGK）
WGK 1
閃點（°F）
Not applicable
閃點（°C）
Not applicable
我们的科学家团队拥有各种研究领域经验，包括生命科学、材料科学、化学合成、色谱、分析及许多其他领域.
联系技术服务部门