Skip to Content

Characterization and humidity sensing properties of the sensor based on Na2Ti3O7 nanotubes.

Characterization and humidity sensing properties of the sensor based on Na2Ti3O7 nanotubes.

Journal of nanoscience and nanotechnology (2014-04-18)

Yupeng Zhang, Jian Wu, Ying Zhang, Wenbin Guo, Shenping Ruan

ABSTRACT

Na2Ti3O7 nanotubes was synthesized by a hydrothermal method, and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Then the material was coated on Al2O3 ceramic substrate to fabricate humidity sensors using Ag-Pd as interdigitated electrodes. The sensor shows high humidity sensitivity and quick response-recovery time. The impedance changes about five orders of magnitude within humidity range from 11% to 95% relative humidity (RH). At the frequency of 100 Hz, the response time is 2 s and recovery time is 4 s, and the maximum hysteresis is less than 3% RH. Moreover, complex impedance property at different RH was investigated to study sensing mechanism. The results indicate the potential applications of Na2Ti3O7 nanotubes for fabricating high-performance humidity sensors.

MATERIALS

Product Number

Brand

Product Description

Supelco

Density Standard 998 kg/m³, H&D Fitzgerald Ltd. Quality

Sigma-Aldrich

Water, BioPerformance Certified

Supelco

Water, ACS reagent, for ultratrace analysis

Supelco

Water, for TOC analysis

Supelco

Water, suitable for ion chromatography

Titanium, IRMM^®, certified reference material, 0.5 mm foil

Sigma-Aldrich

Water, tested according to Ph. Eur.

Sigma-Aldrich

Water, for cell biology, sterile ultrafiltered

Supelco

Water, for HPCE, for luminescence, suitable for UV/Vis spectroscopy

Sigma-Aldrich

Titanium, foil, thickness 0.127 mm, 99.7% trace metals basis

Sigma-Aldrich

Titanium, wire, diam. 1.0 mm, 99.99% trace metals basis

Titanium, IRMM^®, certified reference material, 0.5 mm wire

Sigma-Aldrich

Titanium, foil, thickness 2.0 mm, 99.7% trace metals basis

Sigma-Aldrich

Titanium, wire, diam. 0.81 mm, 99.7% trace metals basis

Sigma-Aldrich

Titanium, wire, diam. 0.25 mm, 99.7% trace metals basis

Sigma-Aldrich

Titanium, 5-10 mm, ≥99.99% trace metals basis (purity exclusive of Na and K content)

Sigma-Aldrich

Water, deuterium-depleted, ≤1 ppm (Deuterium oxide)

Sigma-Aldrich

Titanium, foil, thickness 0.025 mm, 99.98% trace metals basis

Sigma-Aldrich

Water, for embryo transfer, sterile-filtered, BioXtra, suitable for mouse embryo cell culture

Sigma-Aldrich

E-Toxate^™ Water, endotoxin, free

Sigma-Aldrich

Water, PCR Reagent

Sigma-Aldrich

Water, Nuclease-Free Water, for Molecular Biology

Sigma-Aldrich

Water, Deionized

Sigma-Aldrich

Water, sterile-filtered, BioReagent, suitable for cell culture

Sigma-Aldrich

Water, for molecular biology, sterile filtered

Sigma-Aldrich

Water, suitable for HPLC

Titanium, rod, 200mm, diameter 2mm, annealed, 99.6+%

Titanium, rod, 100mm, diameter 10mm, annealed, 99.6+%

Titanium, rod, 100mm, diameter 16mm, as drawn, 99.99+%

Titanium, microfoil, disks, 10mm, thinness 1.0μm, specific density 429μg/cm², permanent mylar 3.5μm support, 99.6+%